Important!

This replacement procedure can be used for:
RENAULT MEGANE II Box Body / Estate (KM_) 1.9 dCi (KM14), RENAULT MEGANE II Box Body / Estate (KM_) 1.6 (KM0C), RENAULT MEGANE II Box Body / Estate (KM_) 1.5 dCi (KM1E), RENAULT MEGANE II Box Body / Estate (KM_) 1.5 dCi (KM0F), RENAULT MEGANE II Box Body / Estate (KM_) 1.5 dCi (KM02), RENAULT MEGANE II Box Body / Estate (KM_) 1.5 dCi (KM1F) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for MEGANE II Box Body / Estate (KM_) and other RENAULT models

Anti-roll bar link

        Anti-roll bar link for Megane II Box Body / Estate (KM_) Diesel (86 hp)
      
        Anti-roll bar link for Megane II Box Body / Estate (KM_) Diesel (101 hp)
      
        Anti-roll bar link for Megane II Box Body / Estate (KM_) Diesel (82 hp)
      
        Anti-roll bar link for Megane II Box Body / Estate (KM_) Diesel (106 hp)
      
        Anti-roll bar link for Megane II Box Body / Estate (KM_) Petrol (111 hp)
      
        Anti-roll bar link for Megane II Box Body / Estate (KM_) Diesel (131 hp)

Replacement: anti roll bar links – RENAULT MEGANE II Box Body / Estate (KM_). Tools you need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Copper grease 
                      
                        Combination spanner #15
                      
                        Combination spanner #17
                      
                        Drive socket # 14
                      
                        HEX bit  No.H6
                      
                        Wheel impact socket #19
                      
                        Ratchet wrench
                      
                        Torque wrench
                      
                        Wheel chock

Buy tools

AUTODOC recommends:

Replace the stabiliser links on RENAULT MEGANE II Box Body / Estate (KM_) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – RENAULT MEGANE II Box Body / Estate (KM_). Take the following steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #19.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Important! Hold the wheel while unscrewing the fastening bolts. RENAULT MEGANE II Box Body / Estate (KM_)
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the shock strut. Use HEX No.H6. Use a combination spanner #17. Use a ratchet wrench.
Step 8

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use HEX No.H6. Use a combination spanner #17. Use a ratchet wrench.
Step 9

Remove the stabilizer rod.

Replacement: anti roll bar links – RENAULT MEGANE II Box Body / Estate (KM_). Tip:
Examine stabiliser bushes. Replace them if needed.
Step 10

Install a new rod, tighten the fasteners.
Step 11

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #14. Use a combination spanner #15. Use a torque wrench. Tighten it to 44 Nm torque.
Step 12

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #14. Use a combination spanner #15. Use a torque wrench. Tighten it to 44 Nm torque.
Step 13

Treat all joints of the stabiliser link. Use copper grease.
Step 14

Clean the wheel rim mounting seat. Use a wire brush. Treat the contacting surface. Use copper grease.
Step 15

Install the wheel.

Replacement: anti roll bar links – RENAULT MEGANE II Box Body / Estate (KM_). AUTODOC experts recommend:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 16

Screw in the wheel bolts. Use wheel impact socket #19.
Step 17

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #19. Use a torque wrench. Tighten it to 110 Nm torque.
Step 18

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Megane II Box Body / Estate (KM_) model.

Browse tyres

How to change front lower arm on RENAULT MEGANE II Box Body / Estate (KM_) – replacement guide

Free download PDF
2.94 MB
How to change front wheel bearing on RENAULT Megane II Box Body / Estate (KM_) – replacement guide

Free download PDF
4.23 MB
How to change rear brake pads on RENAULT MEGANE II Box Body / Estate (KM_) – replacement guide

Free download PDF
1.37 MB
How to change rear brake discs on RENAULT MEGANE II Box Body / Estate (KM_) – replacement guide

Free download PDF
2.12 MB
How to change front brake discs on RENAULT Megane II Box Body / Estate (KM_) – replacement guide

Free download PDF
2.61 MB
How to change serpentine belt on RENAULT MEGANE II Box Body / Estate (KM_) – replacement guide

Free download PDF
1.58 MB

How to change front anti roll bar links on RENAULT Megane II Hatchback (BM, CM) – replacement guide

Free download PDF
1.98 MB
How to change front anti roll bar links on RENAULT Megane I Hatchback (BA) – replacement guide

Free download PDF
2.04 MB
How to change front anti roll bar links on RENAULT Megane II Coupé-Cabriolet (EM) – replacement guide

Free download PDF
1.98 MB
How to change front anti roll bar links on RENAULT Megane I Convertible (EA) – replacement guide

Free download PDF
2.06 MB
How to change front anti roll bar links on RENAULT Megane II Sport Tourer (KM) – replacement guide

Free download PDF
1.98 MB
How to change front anti roll bar links on RENAULT Megane Scenic (JA) – replacement guide

Free download PDF
2.04 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

Replacing your engine cooling fan | AUTODOC tips

2K views

Published on: 15/11/2020
How to clean an engine bay | AUTODOC

6K views

Published on: 11/09/2020
TOP 5 mistakes during DIY oil change | AUTODOC tips

34K views

Published on: 17/06/2021
8 bad driving habits | AUTODOC tips

4K views

Published on: 01/04/2021