Disclaimer
How to change front anti roll bar links on OPEL Tigra Twintop (X04) – replacement guide
downloads:
2
Views:
16
Important!
This replacement procedure can be used for:
OPEL Tigra TwinTop (X04) 1.4 (R97), OPEL Tigra TwinTop (X04) 1.8 (R97), OPEL Tigra TwinTop (X04) 1.3 CDTI (R97) … View more
The steps may slightly vary depending on the car design.
OPEL Tigra TwinTop (X04) 1.4 (R97), OPEL Tigra TwinTop (X04) 1.8 (R97), OPEL Tigra TwinTop (X04) 1.3 CDTI (R97) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Tigra TwinTop (X04) and other OPEL models
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Combination spanner #18
Drive socket # 8
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on OPEL TIGRA TwinTop in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – OPEL TIGRA TwinTop. Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. OPEL TIGRA TwinTop - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use a drive socket #8. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #18. Use a drive socket #8. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – OPEL TIGRA TwinTop. Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Tigra Twintop (X04) model.
Popular maintenance tutorials for Opel Tigra Twintop
Free download PDF
3.12 MB
Free download PDF2.08 MB
Free download PDF3.96 MB
Free download PDF1.3 MB
Free download PDF1.61 MB
Free download PDF1.5 MB
Complete guides for changing the Drop links on different OPEL TIGRA models
Free download PDF972.8 KB
Free download PDF1.2 MB
Free download PDF1.45 MB
Free download PDF1.3 MB
Free download PDF1.21 MB
Free download PDF1.37 MB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your OPEL Tigra TwinTop (X04)
View more
How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC
What to do if your car's air conditioning isn't working properly | AUTODOC tips
Things you should never do with an automatic transmission | AUTODOC tips
Car checks you need to carry out on your car after the winter | AUTODOC tips
