Disclaimer
How to change front anti roll bar links on Opel Astra H saloon – replacement guide
downloads:
11
Views:
224
Important!
This replacement procedure can be used for:
OPEL Astra H Saloon (A04) 1.8 (L69), OPEL Astra H Saloon (A04) 1.3 CDTi (L69), OPEL Astra H Saloon (A04) 1.7 CDTi (L69), OPEL Astra H Saloon (A04) 1.7 CDTi (L69), OPEL Astra H Saloon (A04) 1.6 (L69), OPEL Astra H Saloon (A04) 1.4 (L69) … View more
The steps may slightly vary depending on the car design.
OPEL Astra H Saloon (A04) 1.8 (L69), OPEL Astra H Saloon (A04) 1.3 CDTi (L69), OPEL Astra H Saloon (A04) 1.7 CDTi (L69), OPEL Astra H Saloon (A04) 1.7 CDTi (L69), OPEL Astra H Saloon (A04) 1.6 (L69), OPEL Astra H Saloon (A04) 1.4 (L69) … View more
The steps may slightly vary depending on the car design.
How to change front anti roll bar link on OPEL ASTRA H Saloon [TUTORIAL AUTODOC]

All the parts you need to replace – Anti Roll Bar Links for Astra H Saloon (A04) and other OPEL models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #17
Combination spanner #18
Drive socket # 17
Drive socket # 18
HEX bit No.H5
Wheel impact socket #17
Ratchet wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on Opel Astra H saloon in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – Opel Astra H saloon – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3
Raise the front of the car and secure on supports. - Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Opel Astra H saloon - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #18. Use a drive socket #17. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use a combination spanner #17. - Step 9
Remove the stabiliser link.Replacement: anti roll bar links – Opel Astra H saloon. Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Ιnstall the transverse stabilizer link. - Step 12
Tighten the stabiliser link fastener. Use a combination spanner #18. Use HEX No.H5. - Step 13
Tighten the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #18. Use a drive socket #18. Use HEX No.H5. Use a torque wrench. Tighten it to 55 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Astra H Saloon (A04) model
Popular maintenance tutorials for Opel Astra H Saloon
Complete guides for changing the Drop links on different OPEL ASTRA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL Astra H Saloon (A04)
View more
Coolant comparison test | AUTODOC
Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
What to do if the ABS light comes on: DIY Diagnostics Tips
Most commonly replaced car parts on OPEL ASTRA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















