Disclaimer
How to change front anti roll bar links on Ford Transit Mk7 van – replacement guide
downloads:
3
Views:
14
Important!
This replacement procedure can be used for:
FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi 4x4, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.4 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.4 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.4 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.3 16V RWD, FORD Transit Mk6 Box (V347, V348, FA) 3.2 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.4 TDCi 4x4, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.3 16V LPG RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.3 16V CNG RWD … View more
The steps may slightly vary depending on the car design.
FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi 4x4, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.4 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.4 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.4 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.3 16V RWD, FORD Transit Mk6 Box (V347, V348, FA) 3.2 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.4 TDCi 4x4, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi, FORD Transit Mk6 Box (V347, V348, FA) 2.2 TDCi RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.3 16V LPG RWD, FORD Transit Mk6 Box (V347, V348, FA) 2.3 16V CNG RWD … View more
The steps may slightly vary depending on the car design.
How to change front anti-roll bar links and bushes on the FORD TRANSIT MK7 [AUTODOC TUTORIAL]
All the parts you need to replace – Anti Roll Bar Links for Transit Mk6 Box (V347, V348, FA) and other FORD models
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
All-purpose cleaning spray
Ceramic grease
Torque wrench
20 mm combination spanner
10 mm socket
17 mm socket
19 mm socket
H5 Allen key
21 mm wheel impact socket
Ratchet wrench or power tool for removal/installation of threaded fasteners
Tommy bar
Car lift or jack with jack stands, and wheel chocks
Replacement: anti roll bar links – Ford Transit Mk7 van. AUTODOC recommends:
- Replace the anti-roll bar links and bushes in pairs.
- The replacement procedure is identical for the anti-roll bar links and bushes on both sides of the same axle.
- All the work should be carried out with the ignition switched off.
Replacement: anti roll bar links – Ford Transit Mk7 van. Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel nuts on the front wheels. Use a 21 mm wheel impact socket. Use a tommy bar. - Step 3
Raise the vehicle.Warning!If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands. - Step 4
Unscrew the nuts on one of the wheels and remove it.Replacement: anti roll bar links – Ford Transit Mk7 van. Tip:To avoid injury, hold up the wheel when unscrewing the nuts. - Step 5
Remove the other wheel in the same way. - Step 6
Clean the fasteners of one of the anti-roll bar links. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the anti-roll bar link to the anti-roll bar. Use a 19 mm combination spanner. Use an H5 Allen key to secure the ball stud. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the anti-roll bar link to the suspension strut. Use a 19 mm socket. Use a ratchet wrench. - Step 9
Remove the anti-roll bar link. - Step 10
Follow the same steps to remove the other anti-roll bar link. - Step 11
Clean the mounting seats of the anti-roll bar link on one side of the axle. Use a wire brush. Use an all-purpose cleaning spray. - Step 12
Install a new anti-roll bar link and its fasteners. - Step 13
Tighten the fastener connecting the anti-roll bar link to the anti-roll bar. Use a 20 mm combination spanner. Use a 17 mm socket. Use a torque wrench. Tightening torque: 55 N·m.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Transit Mk6 Van (V347, V348) model
Popular maintenance tutorials for Ford Transit Mk6 Van
Free download PDF
12.48 MB
Free download PDF1.79 MB
Free download PDF1.57 MB
Free download PDF3.24 MB
Free download PDF4.44 MB
Free download PDF2.15 MB
Complete guides for changing the Drop links on different FORD TRANSIT models
Free download PDF1.42 MB
Free download PDF1.46 MB
Free download PDF1.46 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD Transit Mk6 Box (V347, V348, FA)
View more
TOP 5 mistakes during DIY oil change | AUTODOC tips
What to do if your check engine light is on | AUTODOC tips
How do EGR valves work? | AUTODOC
5 mistakes when replacing consumables
Most commonly replaced car parts on FORD TRANSIT
Time to replace parts? Get even better deals in our Shop app.
SCAN ME