Disclaimer
How to change front anti roll bar links on FORD Fiesta Mk4 (J3S, J5S) – replacement guide
downloads:
2
Views:
44
Important!
This replacement procedure can be used for:
FORD Fiesta Mk4 (J3S, J5S) 1.8 DI, FORD Fiesta Mk4 (J3S, J5S) 1.4 i, FORD Fiesta Mk4 (J3S, J5S) 1.8 D, FORD Fiesta Mk4 (J3S, J5S) 1.3 … View more
The steps may slightly vary depending on the car design.
FORD Fiesta Mk4 (J3S, J5S) 1.8 DI, FORD Fiesta Mk4 (J3S, J5S) 1.4 i, FORD Fiesta Mk4 (J3S, J5S) 1.8 D, FORD Fiesta Mk4 (J3S, J5S) 1.3 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Fiesta Mk4 (J3S, J5S) and other FORD models
Alternative products
Anti-roll bar link
Rod / Strut, wheel suspension
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #15
Combination spanner #17
Drive socket # 15
Drive socket # 17
Wheel impact socket #19
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – FORD FIESTA Box (J5_, J3_). AUTODOC recommends:
- Replace the stabiliser links on FORD FIESTA Box (J5_, J3_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – FORD FIESTA Box (J5_, J3_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FORD FIESTA Box (J5_, J3_) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench. - Step 9
Remove the stabilizer rod. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners. Use a combination spanner #15. Use a drive socket #15. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Fiesta Mk4 (J3S, J5S) model
Popular maintenance tutorials for FORD FIESTA Box (J5_, J3_)
Free download PDF
1.66 MB
Free download PDF2.88 MB
Free download PDF788.48 KB
Free download PDF665.6 KB
Free download PDF2.39 MB
Free download PDF7.83 MB
Complete guides for changing the Drop links on different FORD FIESTA models
Free download PDF1.31 MB
Free download PDF1.49 MB
Free download PDF1.26 MB
Free download PDF1.26 MB
Free download PDF1.29 MB
Free download PDF1.26 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD Fiesta Mk4 (J3S, J5S)
View more
Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
How to fix your car with AUTODOC CLUB
Revive Your Vehicle's Look | How to Restore Wheel Rims Yourself!
Most commonly replaced car parts on FORD FIESTA
Time to replace parts? Get even better deals in our Shop app.
SCAN ME