How to carry out replacement: Anti Roll Bar Links 1.3 JTD Fiat Punto 188AX
Disclaimer
Change Fiat Punto 188AX 1.3 D Multijet Anti Roll Bar Links yourself – manuals and video tutorials

How to change front anti roll bar links on FIAT Punto II Van (188) – replacement guide

downloads: 0
Views: 3
Download your free tutorial and fix FIAT PUNTO Van (188AX) 1.9 D 60 problems yourself Download for free 1.33 MB Anti Roll Bar Links for Fiat Punto 188AX Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
FIAT PUNTO Van (188AX) 1.9 D 60, FIAT PUNTO Van (188AX) 1.3 JTD, FIAT PUNTO Van (188AX) 1.3 D Multijet … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for PUNTO Van (188AX) and other FIAT models
Alternative products
How to change Anti-roll bar link on Fiat Punto 188AX 1.3 JTD – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – FIAT PUNTO Van (188AX). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 13
Wheel impact socket #19
Ratchet wrench
Torque wrench
Crow bar
Hydraulic transmission jack
Wheel chock
Buy tools
AUTODOC recommends:
  • Replace the stabiliser links on FIAT PUNTO Van (188AX) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – FIAT PUNTO Van (188AX). Take the following steps:
  1. Step 1
    How to change Anti Roll Bar Links on Fiat Punto 188AX 2000 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FIAT PUNTO Van (188AX) 1.3 JTD 2001 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Fiat Punto 188AX 1.9 D 60 2002 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FIAT PUNTO Van (188AX)
  4. Step 5
    Changing Anti Roll Bar Links on FIAT PUNTO Van (188AX) 1.3 JTD 2003 by yourself
    Remove the wheel.
  5. Step 6
    How to remove FIAT PUNTO 1.9 D 60 2004 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
    AUTODOC recommends:
    Replacement: anti roll bar links – FIAT PUNTO Van (188AX). After applying the spray, wait a few minutes.Wear protective goggles.
  6. Step 7
    How to replace Anti Roll Bar Links on FIAT PUNTO Van (188AX) 2005: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a drive socket #13. Use a ratchet wrench.
  7. Step 8
    Remove the stabilizer bush brackets. Use a crowbar.
    Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on Fiat Punto 188AX 1.3 JTD 2006 - download illustrated guide
    Remove the stabilizer rod. Use a crowbar.
    Replacement: anti roll bar links – FIAT PUNTO Van (188AX). Tip from AUTODOC experts:
    Examine stabiliser bushes. Replace them if needed.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on FIAT PUNTO 2007? This free workshop manual will help you to do it yourself
    Support the arm. Use a hydraulic transmission jack.
  9. Step 11
    Changing of Anti Roll Bar Links on Fiat Punto 188AX 2008 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  10. Step 12
    FIAT PUNTO 1.3 D Multijet Anti Roll Bar Links replacement: online guides and video tutorials
    Install a new rod, tighten the fasteners. Use a crowbar.
  11. Step 13
    Replacing Anti Roll Bar Links on Fiat Punto 188AX 2000 1.3 JTD by yourself
    Install the stabilizer bush brackets. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FIAT Punto II Van (188) model

Fiat Punto 188AX tyre size

Popular maintenance tutorials for Fiat Punto 188AX

More manuals for Fiat Punto 188AX

Complete guides for changing the Drop links on different FIAT PUNTO models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FIAT PUNTO Van (188AX) Anti Roll Bar Links replacement - online guide
Tips & tricks for your FIAT PUNTO Van (188AX)
View more
  • How to change Drop links on FIAT PUNTO Van (188AX) 1.3 D Multijet - replacement tricks
    BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
    2K views
    Published on: 04/03/2021
  • Changing Stabilizer link Fiat Punto 188AX 1.3 JTD - Replacement Tips
    The most common problems when buying a used car | AUTODOC
    4K views
    Published on: 10/11/2022
  • Maintenance Hacks - FIAT PUNTO Van (188AX) 1.9 D 60 Sway bar link replacement guide
    When, why, and how to change engine oil | AUTODOC tips
    6K views
    Published on: 16/08/2024
  • Replace Drop link on Fiat Punto 188AX - free video tips
    How I started restoring a driveshaft | Drivetrain restoration – Part 1
    7K views
    Published on: 17/10/2024

Most commonly replaced car parts on FIAT PUNTO

Professional manuals for the most common FIAT models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FIAT PUNTO Van (188AX) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME