
Disclaimer
How to change front anti roll bar links on FIAT Punto I Convertible (176) – replacement guide
downloads:
0
Views:
4
Important!
This replacement procedure can be used for:
FIAT PUNTO Convertible (176C) 85 16V 1.2, FIAT PUNTO Convertible (176C) 60 1.2 (176AR_, 176BR_), FIAT PUNTO Convertible (176C) 90 1.6, FIAT PUNTO Convertible (176C) 60 1.2 … View more
The steps may slightly vary depending on the car design.
FIAT PUNTO Convertible (176C) 85 16V 1.2, FIAT PUNTO Convertible (176C) 60 1.2 (176AR_, 176BR_), FIAT PUNTO Convertible (176C) 90 1.6, FIAT PUNTO Convertible (176C) 60 1.2 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for PUNTO Convertible (176C) and other FIAT models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 13
Wheel impact socket #19
Ratchet wrench
Torque wrench
Crow bar
Hydraulic transmission jack
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on FIAT PUNTO Convertible (176C) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – FIAT PUNTO Convertible (176C). Take the following steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FIAT PUNTO Convertible (176C)
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.AUTODOC recommends:Replacement: anti roll bar links – FIAT PUNTO Convertible (176C). After applying the spray, wait a few minutes.Wear protective goggles.
- Step 7Unscrew the fastener connecting the stabilizer bar with the control arm. Use a drive socket #13. Use a ratchet wrench.
- Step 8Remove the stabilizer bush brackets. Use a crowbar.Step 9Remove the stabilizer rod. Use a crowbar.Replacement: anti roll bar links – FIAT PUNTO Convertible (176C). Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed.
- Step 10Support the arm. Use a hydraulic transmission jack.
- Step 11Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 12Install a new rod, tighten the fasteners. Use a crowbar.
- Step 13Install the stabilizer bush brackets. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Punto I Convertible (176) model
Popular maintenance tutorials for FIAT PUNTO Convertible (176C)
Complete guides for changing the Drop links on different FIAT PUNTO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FIAT PUNTO Convertible (176C)
View more
- How to replace a timing chain yourself
- How to Make a DIY Foam Sprayer | AUTODOC tips
- Revive Your Vehicle's Look | How to Restore Wheel Rims Yourself!
- How to fix your car with AUTODOC CLUB
Most commonly replaced car parts on FIAT PUNTO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME