Disclaimer
How to change front anti roll bar links on CITROËN Xsara Estate (N2) – replacement guide
downloads:
0
Views:
12
Important!
This replacement procedure can be used for:
CITROËN XSARA Break (N2) 1.4 i, CITROËN XSARA Break (N2) 1.6 i, CITROËN XSARA Break (N2) 1.8 i, CITROËN XSARA Break (N2) 1.8 i Aut., CITROËN XSARA Break (N2) 1.8 i 16V, CITROËN XSARA Break (N2) 1.5 D, CITROËN XSARA Break (N2) 1.8 D, CITROËN XSARA Break (N2) 1.9 D, CITROËN XSARA Break (N2) 1.9 TD, CITROËN XSARA Break (N2) 1.9 D, CITROËN XSARA Break (N2) 1.9 D, CITROËN XSARA Break (N2) 2.0 16V, CITROËN XSARA Break (N2) 2.0 HDI, CITROËN XSARA Break (N2) 1.8 LPG, CITROËN XSARA Break (N2) 1.4 LPG … View more
The steps may slightly vary depending on the car design.
CITROËN XSARA Break (N2) 1.4 i, CITROËN XSARA Break (N2) 1.6 i, CITROËN XSARA Break (N2) 1.8 i, CITROËN XSARA Break (N2) 1.8 i Aut., CITROËN XSARA Break (N2) 1.8 i 16V, CITROËN XSARA Break (N2) 1.5 D, CITROËN XSARA Break (N2) 1.8 D, CITROËN XSARA Break (N2) 1.9 D, CITROËN XSARA Break (N2) 1.9 TD, CITROËN XSARA Break (N2) 1.9 D, CITROËN XSARA Break (N2) 1.9 D, CITROËN XSARA Break (N2) 2.0 16V, CITROËN XSARA Break (N2) 2.0 HDI, CITROËN XSARA Break (N2) 1.8 LPG, CITROËN XSARA Break (N2) 1.4 LPG … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for XSARA Break (N2) and other CITROËN models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 17
Wheel impact socket #19
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on CITROËN XSARA Break (N2) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – CITROËN XSARA Break (N2). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. CITROËN XSARA Break (N2) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – CITROËN XSARA Break (N2). Tip from AUTODOC:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN Xsara Estate (N2) model
Popular maintenance tutorials for Citroen Xsara Estate
Complete guides for changing the Drop links on different CITROËN XSARA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN XSARA Break (N2)
View more
BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
TOP 6 WD-40 lifehacks | AUTODOC tips
Top 5 brake repair mistakes | AUTODOC tips
Most commonly replaced car parts on CITROËN XSARA
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME































