
Disclaimer
How to change front anti roll bar links on CITROËN Xsara Coupe (N0) – replacement guide
downloads:
1
Views:
12
Important!
This replacement procedure can be used for:
CITROËN XSARA Coupe (N0) 1.8 i, CITROËN XSARA Coupe (N0) 1.8 i 16V, CITROËN XSARA Coupe (N0) 2.0 i 16V, CITROËN XSARA Coupe (N0) 1.4 i, CITROËN XSARA Coupe (N0) 1.9 TD, CITROËN XSARA Coupe (N0) 1.9 D, CITROËN XSARA Coupe (N0) 1.9 D, CITROËN XSARA Coupe (N0) 2.0 HDI, CITROËN XSARA Coupe (N0) 1.6 i, CITROËN XSARA Coupe (N0) 1.8 i, CITROËN XSARA Coupe (N0) 1.9 D, CITROËN XSARA Coupe (N0) 1.8 LPG … View more
The steps may slightly vary depending on the car design.
CITROËN XSARA Coupe (N0) 1.8 i, CITROËN XSARA Coupe (N0) 1.8 i 16V, CITROËN XSARA Coupe (N0) 2.0 i 16V, CITROËN XSARA Coupe (N0) 1.4 i, CITROËN XSARA Coupe (N0) 1.9 TD, CITROËN XSARA Coupe (N0) 1.9 D, CITROËN XSARA Coupe (N0) 1.9 D, CITROËN XSARA Coupe (N0) 2.0 HDI, CITROËN XSARA Coupe (N0) 1.6 i, CITROËN XSARA Coupe (N0) 1.8 i, CITROËN XSARA Coupe (N0) 1.9 D, CITROËN XSARA Coupe (N0) 1.8 LPG … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for XSARA Coupe (N0) and other CITROËN models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 17
Wheel impact socket #19
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on CITROËN XSARA Coupe (N0) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – CITROËN XSARA Coupe (N0). Take the following steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. CITROËN XSARA Coupe (N0)
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17.
- Step 8Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17.
- Step 9Remove the stabilizer rod.Replacement: anti roll bar links – CITROËN XSARA Coupe (N0). Tip from AUTODOC:Examine stabiliser bushes. Replace them if needed.
- Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 11Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN Xsara Coupe (N0) model
Popular maintenance tutorials for Citroen Xsara Coupe
Complete guides for changing the Drop links on different CITROËN XSARA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN XSARA Coupe (N0)
View more
- The Ultimate Guide to Engine Bay Cleaning | AUTODOC
- Don’t Replace, Restore: Fixing Damaged Threads at Home
- DIY manual gearbox restoration | Drivetrain restoration – Part 3
- TOP 6 WD-40 lifehacks | AUTODOC tips
Most commonly replaced car parts on CITROËN XSARA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME