
Disclaimer
How to change front lower arm on CITROËN XSARA Break (N2) – replacement guide
downloads:
0
Views:
9
Important!
This replacement procedure can be used for:
CITROËN XSARA Break (N2) 1.4 LPG, CITROËN XSARA Break (N2) 1.4 HDi, CITROËN XSARA Break (N2) 2.0 HDi, CITROËN XSARA Break (N2) 2.0 HDI … View more
The steps may slightly vary depending on the car design.
CITROËN XSARA Break (N2) 1.4 LPG, CITROËN XSARA Break (N2) 1.4 HDi, CITROËN XSARA Break (N2) 2.0 HDi, CITROËN XSARA Break (N2) 2.0 HDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Control Arm for XSARA Break (N2) and other CITROËN models
Suspension arm
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #13
Combination spanner #17
Drive socket # 13
Drive socket # 16
Drive socket # 17
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Torque wrench
Crow bar
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: front lower arm – CITROËN XSARA Break (N2). Professionals recommend:
- The replacement procedure is identical for the left and right lower control arms.
- All work should be done with the engine stopped.
Replacement: front lower arm – CITROËN XSARA Break (N2). Recommended sequence of steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. CITROËN XSARA Break (N2)
- Step 5Remove the wheel.
- Step 6Clean all joints of the arm. Use a wire brush. Use WD-40 spray.Replacement: front lower arm – CITROËN XSARA Break (N2). AUTODOC recommends:After applying the spray, wait a few minutes.Wear protective goggles.
- Step 7Unscrew the ball joint fastening to the steering knuckle. Use a drive socket #17. Use a combination spanner #17.
- Step 8Remove the fastening bolt.
- Step 9Disconnect the lower arm from the steering knuckle. Use a crowbar.
- Step 10Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
- Step 11Unscrew the front arm fastener. Use a drive socket #18. Use a tap wrench.
- Step 12Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
- Step 13Unscrew the rear fastener connecting the control arm to the subframe. Use a drive socket #13. Use a drive socket #16. Use a tap wrench.
- Step 14Remove the rear fastener of the control arm.
- Step 15Remove the front fastener of the control arm.
- Step 16Remove the arm. Use a crowbar.
- Step 17Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
- Step 18Install a new arm. Use a crowbar.Replacement: front lower arm – CITROËN XSARA Break (N2). Tip from AUTODOC:During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
- Step 19Install the rear fastener of the arm.
- Step 20Install the front fastener of the arm.
- Step 21Screw the rear arm fastener. Use a combination spanner #13. Use a drive socket #16. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN Xsara Estate (N2) model
Popular maintenance tutorials for Citroen Xsara Estate
Complete guides for changing the Control arm on different CITROËN XSARA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN XSARA Break (N2)
View more
- 5 possible reasons why your car heater isn't working
- How to repair a bumper yourself | AUTODOC tips
- Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
- Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
Most commonly replaced car parts on CITROËN XSARA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME