
Disclaimer
How to change front anti roll bar links on CITROËN C-Elysée Saloon – replacement guide
downloads:
1
Views:
14
Important!
This replacement procedure can be used for:
CITROËN C-Elysée Saloon 1.2 VTi (DDHMY0), CITROËN C-Elysée Saloon 1.6 HDI, CITROËN C-Elysée Saloon 1.6 VTi (DDNFP0, DDNFP6, DDNFP9), CITROËN C-Elysée Saloon 1.6 BlueHDi, CITROËN C-Elysée Saloon 1.2 VTi, CITROËN C-Elysée Saloon 1.5 BlueHDi, CITROËN C-Elysée Saloon 1.2 PureTech (DDHMRP) … View more
The steps may slightly vary depending on the car design.
CITROËN C-Elysée Saloon 1.2 VTi (DDHMY0), CITROËN C-Elysée Saloon 1.6 HDI, CITROËN C-Elysée Saloon 1.6 VTi (DDNFP0, DDNFP6, DDNFP9), CITROËN C-Elysée Saloon 1.6 BlueHDi, CITROËN C-Elysée Saloon 1.2 VTi, CITROËN C-Elysée Saloon 1.5 BlueHDi, CITROËN C-Elysée Saloon 1.2 PureTech (DDHMRP) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for C-Elysée Saloon and other CITROËN models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #16
Torx bit T30
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – CITROËN C-ELYSEE. AUTODOC recommends:
- Replace the stabiliser links on CITROËN C-ELYSEE in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – CITROËN C-ELYSEE. Recommended sequence of steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: anti roll bar links – CITROËN C-ELYSEE. Tip:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use Torx T30. Use a ratchet wrench.
- Step 8Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #16. Use Torx T30. Use a ratchet wrench.
- Step 9Remove the stabilizer rod.AUTODOC recommends:Examine stabiliser bushes. Replace them if needed.
- Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 11Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN C-Elysée Saloon model
Popular maintenance tutorials for CITROËN C-ELYSEE
Complete guides for changing the Drop links on different CITROËN C-ELYSEE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN C-Elysée Saloon
View more
- What to do if the ABS light comes on: DIY Diagnostics Tips
- When, why, and how to change engine oil | AUTODOC tips
- Top 5 reasons why your car squeals | AUTODOC Tips
- Why Checking Your Oil is Crucial for Engine Performance
Most commonly replaced car parts on CITROËN C-ELYSEE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME