Disclaimer
How to change serpentine belt on CITROËN C-Elysée Saloon – replacement guide
downloads:
5
Views:
73
Recommended replacement interval for the part category Serpentine belt : 6 year / 125000 km
Important!
This replacement procedure can be used for:
CITROËN C-Elysée Saloon 1.6 VTi (DDNFP0, DDNFP6, DDNFP9) … View more
The steps may slightly vary depending on the car design.
CITROËN C-Elysée Saloon 1.6 VTi (DDNFP0, DDNFP6, DDNFP9) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for C-Elysée Saloon and other CITROËN models
Alternative products

Wire brush
Torque wrench
Drive socket # 27
HEX bit no.H8
1/4" square drive extension bar
Wheel impact socket #19
Ratchet wrench
Clip removal tool
Phillips screwdriver
Fender cover
Wheel chock
Replacement: serpentine belt – CITROËN C-ELYSEE. Tools you might need:
- All work should be done with the engine stopped.
Replacement: serpentine belt – CITROËN C-ELYSEE. Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Secure the wheels with chocks.Step 4
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 5Raise the car.Replacement: serpentine belt – CITROËN C-ELYSEE. AUTODOC recommends:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 6
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. CITROËN C-ELYSEE - Step 7
Remove the wheel. - Step 8
Unscrew and remove the wheel arch cover fasteners. Use a clip removal tool. Use a Phillips screwdriver. - Step 9
Remove the wheel arch cover. - Step 10
Release the coolant pipe fasteners. - Step 11
Clean the tensioner pulley fastener. Use a wire brush. - Step 12
Loosen the tensioner pulley fastener. Use HEX No.H8. Use a ratchet wrench. - Step 13
Pull aside the V-ribbed belt tensioner pulley. Use a 1/4" square drive extension bar. Use a ratchet wrench. - Step 14
Remove the V-ribbed belt.Replacement: serpentine belt – CITROËN C-ELYSEE. Tip from AUTODOC experts:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary. - Step 15
Install the V-ribbed belt.Replacement: serpentine belt – CITROËN C-ELYSEE. Professionals recommend:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 16
Tension the belt by turning the tensioner pulley clockwise. Use a 1/4" square drive extension bar. Use a ratchet wrench.Replacement: serpentine belt – CITROËN C-ELYSEE. Tip:Keep the belt taut until you've tightened the tensioner pulley fastener. - Step 17
Tighten the fastener of the serpentine belt tensioner pulley. Use HEX No.H8. Use a torque wrench. Tighten it to 35 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN C-Elysée Saloon model
Popular maintenance tutorials for CITROËN C-ELYSEE
Complete guides for changing the Alternator belt on different CITROËN C-ELYSEE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN C-Elysée Saloon
View more
5 tools that make car repair incredibly simple | AUTODOC tips
DIY jack restoration | AUTODOC tips
Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
How to get your motorcycle ready for spring
Most commonly replaced car parts on CITROËN C-ELYSEE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























