Disclaimer
How to change front anti roll bar links on AUDI A1 Sportback (GBA) – replacement guide
downloads:
2
Views:
36
Important!
This replacement procedure can be used for:
AUDI A1 Sportback (GBA) 30 TFSI, AUDI A1 Sportback (GBA) 25 TFSI, AUDI A1 Sportback (GBA) 35 TFSI, AUDI A1 Sportback (GBA) 40 TFSI, AUDI A1 Sportback (GBA) 30 TFSI, AUDI A1 Sportback (GBA) 40 TFSI … View more
The steps may slightly vary depending on the car design.
AUDI A1 Sportback (GBA) 30 TFSI, AUDI A1 Sportback (GBA) 25 TFSI, AUDI A1 Sportback (GBA) 35 TFSI, AUDI A1 Sportback (GBA) 40 TFSI, AUDI A1 Sportback (GBA) 30 TFSI, AUDI A1 Sportback (GBA) 40 TFSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for A1 Sportback (GBA) and other AUDI models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Drive socket # 16
Drive socket # 17
HEX bit No.H5.
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – AUDI A1 Sportback (GBA). AUTODOC experts recommend:
- Replace the stabiliser links on AUDI A1 Sportback (GBA) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – AUDI A1 Sportback (GBA). Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. AUDI A1 Sportback (GBA) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #16. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – AUDI A1 Sportback (GBA). Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners. Use a combination spanner #17. Use HEX No.H5.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI A1 Sportback (GBA) model
Popular maintenance tutorials for Audi A1 GBA
Complete guides for changing the Drop links on different AUDI A1 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI A1 Sportback (GBA)
View more
Petrol or diesel: The engine showdown! | AUTODOC
DIY vehicle AC compressor restoration
How to Install a New Windscreen Yourself | AUTODOC Expert Tips
Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
Most commonly replaced car parts on AUDI A1
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























