Important!

This replacement procedure can be used for:
BMW 3 Saloon (E46) 318 i, BMW 3 Saloon (E46) 328 i, BMW 3 Saloon (E46) 316 i, BMW 3 Saloon (E46) 318 d, BMW 3 Saloon (E46) 316 i, BMW 3 Saloon (E46) 330 d, BMW 3 Saloon (E46) 318 i, BMW 3 Saloon (E46) 320 d, BMW 3 Saloon (E46) 330 i, BMW 3 Saloon (E46) 320 d, BMW 3 Saloon (E46) 320 i, BMW 3 Saloon (E46) 325 i, BMW 3 Saloon (E46) 325 xi, BMW 3 Saloon (E46) 323 i, BMW 3 Saloon (E46) 320 i, BMW 3 Saloon (E46) 316 i, BMW 3 Saloon (E46) 330 xd, BMW 3 Saloon (E46) 318 d, BMW 3 Saloon (E46) 316 i, BMW 3 Saloon (E46) 330 d, BMW 3 Saloon (E46) 330 xd, BMW 3 Saloon (E46) 330 xi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Bushes for 3 Saloon (E46) and other BMW models

Stabiliser Mounting

Bearing Bush, stabiliser

Repair Kit, stabilizer suspension

Repair Kit, stabilizer coupling rod

Mounting, stabilizer coupling rod

        Stabiliser Mounting for BMW 3 Saloon (E46) 320 i Petrol (170 hp)
      
        Stabiliser Mounting for BMW 3 Saloon (E46) 316 i Petrol (105 hp)
      
        Stabiliser Mounting for BMW 3 Saloon (E46) 318 d Diesel (116 hp)
      
        Stabiliser Mounting for BMW 3 Saloon (E46) 318 i Petrol (118 hp)
      
        Stabiliser Mounting for BMW 3 Saloon (E46) 316 i Petrol (115 hp)
      
        Stabiliser Mounting for BMW 3 Saloon (E46) 325 i Petrol (192 hp)
      
        Stabiliser Mounting for BMW 3 Saloon (E46) 330 d Diesel (184 hp)
      
        Stabiliser Mounting for BMW 3 Saloon (E46) 316 i Petrol (115 hp)
      
        Stabiliser Mounting for BMW 3 Saloon (E46) 328 i Petrol (193 hp)

Replacement: anti roll bar bushes – BMW 3 (E46). List of the tools you'll need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Copper grease 
                      
                        Drive socket # 16 
                      
                        Wheel impact socket #17
                      
                        Ratchet wrench
                      
                        Torque wrench
                      
                        Phillips screwdriver
                      
                        Wheel chock

Buy tools

Replacement: anti roll bar bushes – BMW 3 (E46). AUTODOC recommends:

Both stabilizer bushes should be replaced simultaneously.
The replacement procedure is identical for the right and left stabilizer bushes.
All work should be done with the engine stopped.

Replacement: anti roll bar bushes – BMW 3 (E46). Recommended sequence of steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts.Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

Replacement: anti roll bar bushes – BMW 3 (E46). Tip:

To avoid injury, hold up the wheel when unscrewing the bolts.
Step 5

Remove the wheel.
Step 6

Unscrew the fasteners of the lower sound insulation. Use a Phillips screwdriver.
Step 7

Remove the lower sound insulation.

Please note!

Some cars are not equipped with the lower sound insulation.
Step 8

Clean the fasteners of the stabilizer bush brackets.Use a wire brush.Use WD-40 spray.
Step 9

Unscrew the fasteners of the stabilizer bush brackets.Use a drive socket #16.Use a ratchet wrench.
Step 10

Remove the stabilizer bush brackets.
Step 11

Remove the stabilizer bushes.
Step 12

Install the new stabilizer bushes.
Step 13

Clean the mounting seats of the stabilizer bushes.Use WD-40 spray.
Step 14

Install the stabilizer bush brackets.
Step 15

Screw the fasteners of the stabilizer bush brackets.Use a drive socket #16.Use a torque wrench.Tighten it to 28 nm torque.
Step 16

Install the lower sound insulation.
Step 17

Screw in the fasteners of the lower sound insulation. Use a Phillips screwdriver.
Step 18

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 19

Install the wheel.

AUTODOC recommends:

Important! Hold the wheel while screwing in the fastening bolts. BMW 3 (E46)
Step 20

Screw in the wheel bolts.Use wheel impact socket #17.
Step 21

Lower the car and working in a cross order, tighten the wheel bolts.Use a torque wrench.Tighten it to 120 Nm torque.
Step 22

Remove the jacks and chocks.

Comment

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

How to change front wheel bearing on BMW E46 – replacement guide

Free download PDF

11.21 MB
How to change track rod end on BMW E46 – replacement guide

Free download PDF

7.19 MB
How to change front anti roll bar links on BMW E46 – replacement guide

Free download PDF

6.06 MB
How to change front lower arm on BMW 3 Saloon (E46) – replacement guide

Free download PDF

3.82 MB
How to change front strut mount on BMW 3 Saloon (E46) – replacement guide

Free download PDF

3.31 MB
How to change rear brake pads on BMW 3 Saloon (E46) – replacement guide

Free download PDF

2.76 MB

How to change front anti roll bar bushes on BMW 3 Coupe (E46) – replacement guide

Free download PDF

2.35 MB
How to change front anti roll bar bushes on BMW E46 convertible – replacement guide

Free download PDF

2.31 MB
How to change front anti roll bar bushes on BMW E46 touring – replacement guide

Free download PDF

2.05 MB
How to change front anti roll bar bushes on BMW 3 Compact (E46) – replacement guide

Free download PDF

2.33 MB
How to change front anti roll bar bushes on Opel Corsa S93 – replacement guide

Free download PDF

3.73 MB
How to change rear anti roll bar bushes on VW Sharan 1 – replacement guide

Free download PDF

3.97 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

Tips & tricks for your BMW 3 Saloon (E46)

5 mistakes made when washing the engine | AUTODOC

16K views

Published on: 22/04/2021
How to save when buying car parts

1K views

Published on: 03/02/2022
Petrol or diesel? What's the difference between these engines? | AUTODOC

3K views

Published on: 04/05/2021
What to do if your check engine light is on | AUTODOC tips

9K views

Published on: 19/08/2020