
Disclaimer
How to change front anti roll bar bushes on BMW 3 Compact (E46) – replacement guide
downloads:
3
Views:
30
Important!
This replacement procedure can be used for:
BMW 3 Compact (E46) 316 ti, BMW 3 Compact (E46) 325ti, BMW 3 Compact (E46) 318 ti, BMW 3 Compact (E46) 320 td, BMW 3 Compact (E46) 318 td, BMW 3 Compact (E46) 316 ti … View more
The steps may slightly vary depending on the car design.
BMW 3 Compact (E46) 316 ti, BMW 3 Compact (E46) 325ti, BMW 3 Compact (E46) 318 ti, BMW 3 Compact (E46) 320 td, BMW 3 Compact (E46) 318 td, BMW 3 Compact (E46) 316 ti … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Bushes for 3 Compact (E46) and other BMW models
Anti roll bar bush
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 16
Wheel impact socket #17
Ratchet wrench
Torque wrench
Phillips screwdriver
Wheel chock
Replacement: anti roll bar bushes – BMW 3 Compact (E46). AUTODOC recommends:
- Both stabilizer bushes should be replaced simultaneously.
- The replacement procedure is identical for the right and left stabilizer bushes.
- All work should be done with the engine stopped.
Replacement: anti roll bar bushes – BMW 3 Compact (E46). Recommended sequence of steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: anti roll bar bushes – BMW 3 Compact (E46). Tip:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Unscrew the fasteners of the lower sound insulation. Use a Phillips screwdriver.
- Step 7Remove the lower sound insulation.Please note!Some cars are not equipped with the lower sound insulation.
- Step 8Clean the fasteners of the stabilizer bush brackets. Use a wire brush. Use WD-40 spray.
- Step 9Unscrew the fasteners of the stabilizer bush brackets. Use a drive socket #16. Use a ratchet wrench.
- Step 10Remove the stabilizer bush brackets.
- Step 11Remove the stabilizer bushes.
- Step 12Install the new stabilizer bushes.
- Step 13Clean the mounting seats of the stabilizer bushes. Use WD-40 spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the BMW 3 Compact (E46) model
Popular maintenance tutorials for BMW 3 Compact (E46)
Complete guides for changing the Stabilizer bushes on different BMW 3 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your BMW 3 Compact (E46)
View more
- How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
- 5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
- How to easily repair a punctured tyre | AUTODOC tips
- Top 5 reasons why the suspension knocks | AUTODOC tips
Most commonly replaced car parts on BMW 3 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME