Disclaimer
How to change front ABS sensor on AUDI A3 Hatchback (8V1, 8VK) – replacement guide
downloads:
10
Views:
250
Important!
This replacement procedure can be used for:
AUDI A3 Hatchback (8V1, 8VK) 1.8 TFSI quattro, AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI quattro, AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI quattro, AUDI A3 Hatchback (8V1, 8VK) S3 quattro, AUDI A3 Hatchback (8V1, 8VK) S3 quattro, AUDI A3 Hatchback (8V1, 8VK) S3 quattro, AUDI A3 Hatchback (8V1, 8VK) S3 quattro, AUDI A3 Hatchback (8V1, 8VK) 2.0 TFSI quattro, AUDI A3 Hatchback (8V1, 8VK) S3 quattro … View more
The steps may slightly vary depending on the car design.
AUDI A3 Hatchback (8V1, 8VK) 1.8 TFSI quattro, AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI quattro, AUDI A3 Hatchback (8V1, 8VK) 2.0 TDI quattro, AUDI A3 Hatchback (8V1, 8VK) S3 quattro, AUDI A3 Hatchback (8V1, 8VK) S3 quattro, AUDI A3 Hatchback (8V1, 8VK) S3 quattro, AUDI A3 Hatchback (8V1, 8VK) S3 quattro, AUDI A3 Hatchback (8V1, 8VK) 2.0 TFSI quattro, AUDI A3 Hatchback (8V1, 8VK) S3 quattro … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – ABS Sensor for A3 Hatchback (8V1, 8VK) and other AUDI models
Alternative products

Wire brush
Nylon cleaning brush
WD-40 spray
Brake cleaner
Electronic spray
Multipurpose grease
Copper grease
Torque wrench
HEX bit No.H5
Wheel impact socket #17
Ratchet wrench
Flat screwdriver
Wheel chock
Replacement: ABS sensor – AUDI A3 (8V1). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: ABS sensor – AUDI A3 (8V1). Use the following procedure:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. AUDI A3 (8V1) - Step 5
Remove the wheel. - Step 6
Detach the ABS sensor connector. - Step 7
Clean the ABS sensor fastener. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the ABS sensor fastener. Use HEX No.H5. Use a ratchet wrench. - Step 9
Disconnect the ABS sensor. - Step 10
Clean the ABS sensor mounting seat. Use a wire brush. Use WD-40 spray. - Step 11
Treat the ABS sensor fastener. Use a multipurpose grease. Use a flat screwdriver. - Step 12
Connect the ABS sensor. - Step 13
Tighten the fastener that connects the ABS sensor to the steering knuckle. Use HEX No.H5. Use a torque wrench. Tighten it to 7 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI A3 Hatchback (8V1, 8VK) model
Popular maintenance tutorials for AUDI A3 8v
Complete guides for changing the Wheel speed sensor on different AUDI A3 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI A3 Hatchback (8V1, 8VK)
View more
#DIY Tips for Fixing Your Car's Air Conditioning Issues | Don't Wait for Costly Repairs!
Checking the starter without removing it | AUTODOC tips
How I started restoring a driveshaft | Drivetrain restoration – Part 1
Save Money on Fuel with These Easy Tips | AUTODOC
Most commonly replaced car parts on AUDI A3
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























