Disclaimer
How to change engine thermostat on MERCEDES-BENZ W124 Convertible (A124) – replacement guide
downloads:
0
Views:
38
Recommended replacement interval for the part category Thermostat : 50000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ W124 Convertible (A124) 300 CE-24 (124.061) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ W124 Convertible (A124) 300 CE-24 (124.061) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Thermostat for W124 Convertible (A124) and other MERCEDES-BENZ models
Alternative products

Wire brush
All-purpose cleaning spray
Torque wrench
Combination spanner #10
Drive socket # 7
Drive socket # 8
Drive socket # 10
Ratchet wrench
Long nose pliers
Funnel
Fluid container
Fender cover
Replacement: engine thermostat – MERCEDES-BENZ CABRIOLET (A124). AUTODOC recommends:
- Check the condition of the coolant every time you replace the thermostat. Change the coolant if necessary.
- Please note: all work on the car – MERCEDES-BENZ CABRIOLET (A124) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Unscrew the coolant reservoir cap.Step 4Lift the car using a jack or place it over an inspection pit.Step 5Prepare a container for fluids.Step 6
Open the coolant drain tap. - Step 7
Drain the coolant from the engine.Replacement: engine thermostat – MERCEDES-BENZ CABRIOLET (A124). AUTODOC experts recommend:All work should be done with the engine stopped.Wait until the coolant has completely flowed out of the drain hole. - Step 8Close the coolant drain tap.Step 9
Loosen the clamp of the expansion tank hose. Use a drive socket #7. Use a ratchet wrench. - Step 10
Detach the expansion tank hose from the thermostat housing. - Step 11
Detach the coolant hose. - Step 12
Unscrew the thermostat housing fasteners. Use a drive socket #10. Use a ratchet wrench. - Step 13
Remove the fastening bolts. - Step 14
Remove the thermostat together with the housing.Replacement: engine thermostat – MERCEDES-BENZ CABRIOLET (A124). Professionals recommend:Caution! Coolant may leak out of the coolant lines and thermostat housing. - Step 15
Clean the thermostat housing mounting seat. Use all-purpose cleaning spray. - Step 16Clean the thermostat mounting seat. Use a wire brush. Use all-purpose cleaning spray.Step 17
Install a new thermostat. - Step 18
Install the thermostat housing.Replacement: engine thermostat – MERCEDES-BENZ CABRIOLET (A124). Tip from AUTODOC experts:Be sure to use a new O-ring when installing the sensor. - Step 19
Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ W124 Convertible (A124) model
Popular maintenance tutorials for Mercedes A124 Convertible
Complete guides for changing the Thermostat housing on different MERCEDES-BENZ 123 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ W124 Convertible (A124)
View more
Why Checking Your Oil is Crucial for Engine Performance
Three ways to change oil without a lift
Transform Your Car's Look: 6 Simple Accessories You Need to Try!
Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
Most commonly replaced car parts on MERCEDES-BENZ 123 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























