Disclaimer
How to change rear anti roll bar links on MERCEDES-BENZ W124 Convertible (A124) – replacement guide
downloads:
2
Views:
18
Important!
This replacement procedure can be used for:
MERCEDES-BENZ W124 Convertible (A124) 320 CE (124.066), MERCEDES-BENZ W124 Convertible (A124) 300 CE-24 (124.061), MERCEDES-BENZ W124 Convertible (A124) 300 CE-24 (124.061) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ W124 Convertible (A124) 320 CE (124.066), MERCEDES-BENZ W124 Convertible (A124) 300 CE-24 (124.061), MERCEDES-BENZ W124 Convertible (A124) 300 CE-24 (124.061) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for W124 Convertible (A124) and other MERCEDES-BENZ models
Alternative products

Wire brush
WD-40 spray
Copper grease
Brake cleaner
High-temperature ceramic grease
Torque wrench
Drive socket # 10
Drive socket # 13
Combination spanner #13
Combination spanner #17
Combination spanner #19
Wheel impact socket #17
Ratchet wrench
Crow bar
Wheel chock
Replacement: anti roll bar links – MERCEDES-BENZ CABRIOLET (A124). AUTODOC recommends:
- Replace the stabiliser links on MERCEDES-BENZ CABRIOLET (A124) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – MERCEDES-BENZ CABRIOLET (A124). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – MERCEDES-BENZ CABRIOLET (A124). Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Unscrew the fasteners of the control arm plastic cover. Use a drive socket #10. Use a ratchet wrench. - Step 7
Remove the control arm plastic cover. - Step 8
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 9
Unscrew the fastener connecting the stabilizer link to the control arm. Use a combination spanner #13. Use a drive socket #13. Use a ratchet wrench. - Step 10
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a combination spanner #19. - Step 11
Remove the stabilizer rod. - Step 12Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.Step 13
Install a new rod, tighten the fasteners. Use a crowbar. - Step 14
Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a combination spanner #19. Use a torque wrench. Tighten it to 30 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ W124 Convertible (A124) model
Popular maintenance tutorials for Mercedes A124 Convertible
Complete guides for changing the Drop links on different MERCEDES-BENZ 123 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ W124 Convertible (A124)
View more
Deep interior cleaning | Car transformation by detailing
BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
Most commonly replaced car parts on MERCEDES-BENZ 123 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
























