Disclaimer
How to change engine thermostat on AUDI A4 Convertible (8H7, B6, 8HE, B7) – replacement guide
downloads:
11
Views:
209
Recommended replacement interval for the part category Thermostat : 50000 km
Important!
This replacement procedure can be used for:
AUDI A4 Convertible (8H7, B6, 8HE, B7) 2.0 TDI, AUDI A4 Convertible (8H7, B6, 8HE, B7) 2.0 TDI … View more
The steps may slightly vary depending on the car design.
AUDI A4 Convertible (8H7, B6, 8HE, B7) 2.0 TDI, AUDI A4 Convertible (8H7, B6, 8HE, B7) 2.0 TDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Thermostat for A4 B7 Convertible (8HE) and other AUDI models
Alternative products

Torque wrench
Drive socket # 7
Drive socket # 10
Drive socket # 13
Ratchet wrench
Fluid container
Funnel
Fender cover
Replacement: engine thermostat – AUDI A4 B7 Cabrio (8HE). Tip from AUTODOC:
- Check the condition of the coolant every time you replace the thermostat. Change the coolant if necessary.
- Please note: all work on the car – AUDI A4 B7 Cabrio (8HE) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the coolant reservoir cap. - Step 4
Prepare a container for fluids. - Step 5
Loosen the coolant hose clamp. Use a drive socket #7. Use a ratchet wrench. - Step 6
Detach the coolant hose. - Step 7
Drain the coolant from the engine.Replacement: engine thermostat – AUDI A4 B7 Cabrio (8HE). Tip:Caution! The coolant can be very hot.Wear gloves to prevent contact with hot liquid.All work should be done with the engine stopped.Wait until the coolant has completely flowed out of the drain hole. - Step 8
Unscrew the thermostat housing fasteners. Use a drive socket #13. Use a ratchet wrench. - Step 9
Remove the thermostat housing.AUTODOC recommends:Replacement: engine thermostat – AUDI A4 B7 Cabrio (8HE). Do not use excessive force when removing the part as this may damage it. - Step 10
Remove the thermostat.AUTODOC recommends:Replacement: engine thermostat – AUDI A4 B7 Cabrio (8HE). Do not use excessive force when removing the part as this may damage it.Caution! Coolant may leak out of the coolant lines and thermostat housing. - Step 11
Install a new thermostat.Replacement: engine thermostat – AUDI A4 B7 Cabrio (8HE). Tip:When installing, do not use excessive force to avoid damage to the part. - Step 12
Install the thermostat housing. - Step 13
Tighten the thermostat housing fasteners. Use a drive socket #10. Use a torque wrench. Tighten it to 13 nm torque. - Step 14
Attach the coolant hose.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI A4 B7 Convertible (8HE) model
Popular maintenance tutorials for AUDI A4 B7 Cabrio (8HE)
Complete guides for changing the Thermostat housing on different AUDI A4 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI A4 B7 Convertible (8HE)
View more
#DIY Tips for Fixing Your Car's Air Conditioning Issues | Don't Wait for Costly Repairs!
How to fix your car with AUTODOC CLUB
How do EGR valves work? | AUTODOC
Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
Most commonly replaced car parts on AUDI A4
Time to replace parts? Get even better deals in our Shop app.

SCAN ME























