Disclaimer
How to change engine oil and filter on VW POLO VIVO Saloon – replacement guide
downloads:
1
Views:
181
Recommended replacement interval for the part category Oil filter : 12 month / 15000 km
Important!
This replacement procedure can be used for:
VW POLO VIVO Saloon 1.6 … View more
The steps may slightly vary depending on the car design.
VW POLO VIVO Saloon 1.6 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Oil Filter for POLO VIVO Saloon and other VW models
Alternative products

Wire brush
All-purpose cleaning spray
Oil filter cup socket 76-14F
Drive socket # 19
Ratchet wrench
Torque wrench
Oil drain pan
Funnel
Fender cover
Replacement: engine oil and filter – VW POLO VIVO Saloon. AUTODOC recommends:
- Replace the oil filter every time when changing motor oil.
- Wear gloves to prevent contact with hot liquid.
- All work should be done with the engine stopped.
Replacement: engine oil and filter – VW POLO VIVO Saloon. Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the oil filler plug. - Step 4Lift the car using a jack or place it over an inspection pit.Replacement: engine oil and filter – VW POLO VIVO Saloon. Tip from AUTODOC:The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point.All work should be done with the engine stopped.Step 5
Clean the area of the oil pan drainage hole. Use a wire brush. Use all-purpose cleaning spray. - Step 6
Put a waste oil container with at least 4 l capacity under the drainage hole. - Step 7
Unscrew the drain plug. Use a drive socket #19. Use a ratchet wrench. - Step 8
Drain the used oil.Replacement: engine oil and filter – VW POLO VIVO Saloon. AUTODOC experts recommend:Caution! The oil may be hot.Wait until the oil has completely drained from the drainage hole. - Step 9
Clean the oil filter housing cap. Use all-purpose cleaning spray. - Step 10Prepare a container for the old oil filter.Step 11
Unscrew the oil filter. Use the 76-14F socket. Use a ratchet wrench. - Step 12Put the old oil filter in the container.Replacement: engine oil and filter – VW POLO VIVO Saloon. AUTODOC recommends:Move up the container. The oil starts to drain out of the drainage hole immediately after you have removed the oil filter.Step 13Clean the oil filter seat.Step 14
Lubricate the rubber seal of the new filter with a little amount of fresh oil. - Step 15
Screw the new filter into its place. Use the 76-14F socket. Use a torque wrench. Tighten it to 25 Nm torque. - Step 16
Clean the area of the oil pan drainage hole. - Step 17
Screw in the new drainage plug and tighten it. Use a drive socket #19. Use a torque wrench. Tighten it to 26 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Polo Vivo Saloon model
Popular maintenance tutorials for VW Polo Vivo
Complete guides for changing the Oil filters on different VW POLO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW POLO VIVO Saloon
View more
Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
Why Is the Windscreen Washer Not Spraying? Solution
5 reasons why your car is making a knocking sound
Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
Most commonly replaced car parts on VW POLO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























