Disclaimer
How to change engine oil and filter on NISSAN NV350 / Caravan Minibus (E26) diesel – replacement guide
downloads:
7
Views:
351
Recommended replacement interval for the part category Oil filter : 12 month / 15000 km
Important!
This replacement procedure can be used for:
NISSAN NV350 / Caravan Minibus (E26) 2.5 dCi … View more
The steps may slightly vary depending on the car design.
NISSAN NV350 / Caravan Minibus (E26) 2.5 dCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Oil Filter for NV350 / Caravan Minibus (E26) and other NISSAN models
Alternative products

All-purpose cleaning spray
Drive socket # 14
Ratchet wrench
Torque wrench
Oil drain pan
Funnel
Fender cover
Replacement: engine oil and filter – NISSAN NV350 / Caravan Bus (E26). AUTODOC experts recommend:
- Replace the oil filter every time when changing motor oil.
- Wear gloves to prevent contact with hot liquid.
- Warning! Shut down the engine before starting any work – NISSAN NV350 / Caravan Bus (E26).
Carry out replacement in the following order:
- Step 1Lift the car using a jack or place it over an inspection pit.Replacement: engine oil and filter – NISSAN NV350 / Caravan Bus (E26). Tip:The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point.Step 2Put a waste oil container with at least 6 l capacity under the drainage hole.Step 3
Unscrew the oil filter. - Step 4
Put the old oil filter in the container.AUTODOC recommends:Move up the container. The oil starts to drain out of the drainage hole immediately after you have removed the oil filter. - Step 5
Clean the oil filter seat. Screw the new filter into its place. - Step 6
Unscrew the drain plug. Use a drive socket #14. Use a ratchet wrench. - Step 7
Drain the used oil.Replacement: engine oil and filter – NISSAN NV350 / Caravan Bus (E26). Tip from AUTODOC:Caution! The oil may be hot.Wait until the oil has completely drained from the drainage hole. - Step 8Clean the area of the oil pan drainage hole.Step 9
Screw in the new drainage plug and tighten it. Use a drive socket #14. Use a torque wrench. Tighten it to 25 Nm torque. - Step 10
Clean the area of the oil pan drainage hole. Use all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the NISSAN NV350 / Caravan Minibus (E26) model
Popular maintenance tutorials for NISSAN NV350 / Caravan Bus (E26)
Complete guides for changing the Oil filters on different NISSAN NV350 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your NISSAN NV350 / Caravan Minibus (E26)
View more
How to make an injector test bench yourself
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
How to Get the Best Deals on Car Parts | Save Money with AUTODOC
Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
Most commonly replaced car parts on NISSAN NV350
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
























