How to carry out replacement: Oil Filter 2.0 i 16V Turbo Nissan S14
Disclaimer
Change Nissan S14 2.0 i 16V Turbo Oil Filter yourself – manuals and video tutorials

How to change engine oil and filter on NISSAN 200SX (S14) – replacement guide

downloads: 3
Views: 108
Download your free tutorial and fix NISSAN 200 SX (S14) 2.0 problems yourself Download for free 2.46 MB Oil Filter for Nissan S14 Shop now
Leave a comment Open in a new tab
When to replace the Oil Filter on your NISSAN 200SX
Recommended replacement interval for the part category Oil filter : 15000 km
Important!
This replacement procedure can be used for:
NISSAN 200 SX (S14) 2.0 i 16V, NISSAN 200 SX (S14) 2.0 i 16V Turbo … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Oil Filter for 200 SX (S14) and other NISSAN models
Alternative products
How to change Oil filter on Nissan S14 2.0 i 16V Turbo – step-by-step instructions for straightforward car repair Oil filter
Tools
Replacement: engine oil and filter – NISSAN 200 SX (S14). Tools you'll need:
Impact socket №19
Impact socket №10
Combination spanner №19
Oil filter cup socket 65/67-14f
Torque wrench
Oil drain pan
Funnel
Flat screwdriver
Buy tools
Replacement: engine oil and filter – NISSAN 200 SX (S14). AUTODOC experts recommend:
  • Replace the oil filter every time when changing motor oil.
  • All work should be done with the engine stopped.
  • Wear gloves to prevent contact with hot liquid.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    How to change Oil Filter on Nissan S14 1993 - free PDF and video manuals
    Remove the oil filler cap.
  2. Step 3
    How to replace NISSAN 200 SX (S14) 2.0 i 16V Turbo 1994 Oil Filter - step-by-step manuals and video guides
    Pour the engine flush in.
  3. Step 4
    Nissan S14 2.0 Turbo 1995 Oil Filter replacement: free workshop manuals
    Install the oil filler cap.
  4. Step 5
    Start the engine, let it run for 15 minutes, and then stop it.
    Step 6
    Lift the car using a jack or place it over an inspection pit.
    AUTODOC recommends:
    The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point.
    Step 7
    Changing Oil Filter on NISSAN 200 SX (S14) 2.0 1996 by yourself
    Undo the fasteners of the oil pan lower cover.
  5. Step 8
    How to remove NISSAN 200SX 2.0 i 16V Turbo 1997 Oil Filter - online easy-to-follow instructions
    Remove the oil pan cover. Use a drive socket #10. Use a flat screwdriver.
  6. Step 9
    Put a waste oil container with at least 5 l capacity under the drainage hole.
    Step 10
    How to replace Oil Filter on NISSAN 200 SX (S14) 1998: download PDF manuals and video instructions
    Unscrew the drain plug. Use a drive socket no.19 Or ring spanner no.19.
  7. Step 11
    How hard is it to do yourself: Oil Filter replacement on Nissan S14 2.0 i 16V 1999 - download illustrated guide
    Drain the used oil.
    Replacement: engine oil and filter – NISSAN 200 SX (S14). Professionals recommend:
    Caution! The oil may be hot.Wait until the oil has completely drained from the drainage hole.
  8. Step 12
    Move the container under the oil filter.
    Step 13
    Need to know how to renew Oil Filter on NISSAN 200SX 1993? This free workshop manual will help you to do it yourself
    Unscrew the oil filter. Use the 65/67-14f socket.
  9. Step 14
    Changing of Oil Filter on Nissan S14 1994 won't be an issue if you follow this illustrated step-by-step guide
    Remove the oil filter. Prepare a container for the old oil filter. Put the old oil filter in the container.
    AUTODOC recommends:
    Move up the container. The oil starts to drain out of the drainage hole immediately after you have removed the oil filter.
  10. Step 15
    NISSAN 200SX 2.0 i 16V Turbo Oil Filter replacement: online guides and video tutorials
    Clean the oil filter seat.
  11. Step 16
    Replacing Oil Filter on Nissan S14 1996 2.0 i 16V Turbo by yourself
    Clean the area of the oil pan drainage hole.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN 200SX (S14) model

Nissan S14 tyre size

Popular maintenance tutorials for Nissan S14

More manuals for Nissan S14

Complete guides for changing the Oil filters on different NISSAN 200SX models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY NISSAN 200 SX (S14) Oil Filter replacement - online guide
Tips & tricks for your NISSAN 200 SX (S14)
View more
  • How to change Oil filters on NISSAN 200 SX (S14) 2.0 i 16V - replacement tricks
    How to Order Car Parts Online: Avoid These 5 Common Pitfalls
    4K views
    Published on: 10/03/2022
  • Changing Engine oil filter Nissan S14 2.0 i 16V Turbo - Replacement Tips
    DIY manual gearbox restoration | Drivetrain restoration – Part 3
    13K views
    Published on: 14/11/2024
  • Maintenance Hacks - NISSAN 200 SX (S14) 2.0 Turbo Oil filters replacement guide
    How to unlock your car without a key | AUTODOC tips
    1M views
    Published on: 15/09/2022
  • Replace Engine oil filter on Nissan S14 - free video tips
    How to remove rust | AUTODOC tips
    27K views
    Published on: 16/09/2021

Most commonly replaced car parts on NISSAN 200SX

Professional manuals for the most common NISSAN models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
NISSAN 200 SX (S14) Oil Filter replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME