Important!
This replacement procedure can be used for:
VW Vento (1H2) 1.6, VW Vento (1H2) 1.8, VW Vento (1H2) 1.8 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Distributor Cap for Vento (1H2) and other VW models
Alternative products
How to change Distributor Cap on VW Vento 1h2 1.8 – step-by-step instructions for straightforward car repair Distributor Cap
Tools
Replacement: distributor cap – VW VENTO (1H2). Tools you need:
Electronic spray
Crow bar
Fender cover
Replacement: distributor cap – VW VENTO (1H2). Tip from AUTODOC experts:
  • Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
  • Thoroughly inspect the ignition distributor assembly. Replace any worn parts.
  • All work should be done with the engine stopped.
Replacement: distributor cap – VW VENTO (1H2). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Distributor Cap on VW Vento 1h2 1991 - free PDF and video manuals
    Make marks on the distributor cap to indicate the installation order of the spark plug wires.
  2. Step 4
    How to replace VW Vento (1H2) 1.8 1992 Distributor Cap - step-by-step manuals and video guides
    Disconnect the spark plug wires from the distributor cap.
    Replacement: distributor cap – VW VENTO (1H2). Tip from AUTODOC experts:
    Be careful to avoid damaging spark plug wires.
  3. Step 5
    VW Vento 1h2 2.0 1993 Distributor Cap replacement: free workshop manuals
    Release the distributor cap clips. Use a crowbar.
  4. Step 6
    Changing Distributor Cap on VW Vento (1H2) 1.9 TDI 1994 by yourself
    Remove the distributor cap.
    AUTODOC recommends:
    Replacement: distributor cap – VW VENTO (1H2). Do not use excessive force when removing the part as this may damage it.
  5. Step 7
    How to remove VW VENTO 1.6 1995 Distributor Cap - online easy-to-follow instructions
    Install a new distributor cap.
    AUTODOC recommends:
    Replacement: distributor cap – VW VENTO (1H2). Do not use excessive force during installation. This may damage the part.
  6. Step 8
    How to replace Distributor Cap on VW Vento (1H2) 1996: download PDF manuals and video instructions
    Fasten the distributor cap clips.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VW Vento (1H2) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VW Vento (1H2) Distributor Cap replacement - online guide
Tips & tricks for your VW Vento (1H2)
View more
  • How to change Ignition distributor cap on VW Vento (1H2) 1.9 TD - replacement tricks
    Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
  • Changing Ignition distributor cap VW Vento 1h2 1.8 - Replacement Tips
    5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips
  • Maintenance Hacks - VW Vento (1H2) 2.0 Ignition distributor cap replacement guide
    Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
  • Replace Ignition distributor cap on VW Vento 1h2 - free video tips
    What causes engine misfire? | AUTODOC
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VW Vento (1H2) Distributor Cap replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME