Important!
This replacement procedure can be used for:
VW PASSAT (3A2, 35I) 1.6, VW PASSAT (3A2, 35I) 1.8, VW PASSAT (3A2, 35I) 1.8 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Distributor Cap for PASSAT (3A2, 35I) and other VW models
Alternative products
How to change Distributor Cap on VW Passat B4 35i 1.8 – step-by-step instructions for straightforward car repair Distributor Cap
Tools
Replacement: distributor cap – VW PASSAT (3A2, 35I). Tools you need:
Electronic spray
Crow bar
Fender cover
Replacement: distributor cap – VW PASSAT (3A2, 35I). Tip from AUTODOC experts:
  • Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
  • Thoroughly inspect the ignition distributor assembly. Replace any worn parts.
  • All work should be done with the engine stopped.
Replacement: distributor cap – VW PASSAT (3A2, 35I). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Distributor Cap on VW Passat B4 35i 1988 - free PDF and video manuals
    Make marks on the distributor cap to indicate the installation order of the spark plug wires.
  2. Step 4
    How to replace VW PASSAT (3A2, 35I) 1.8 1989 Distributor Cap - step-by-step manuals and video guides
    Disconnect the spark plug wires from the distributor cap.
    Replacement: distributor cap – VW PASSAT (3A2, 35I). Tip from AUTODOC experts:
    Be careful to avoid damaging spark plug wires.
  3. Step 5
    VW Passat B4 35i 1.9 TDI 1990 Distributor Cap replacement: free workshop manuals
    Release the distributor cap clips. Use a crowbar.
  4. Step 6
    Changing Distributor Cap on VW PASSAT (3A2, 35I) 1.6 TD 1991 by yourself
    Remove the distributor cap.
    AUTODOC recommends:
    Replacement: distributor cap – VW PASSAT (3A2, 35I). Do not use excessive force when removing the part as this may damage it.
  5. Step 7
    How to remove VW PASSAT 2.8 VR6 1992 Distributor Cap - online easy-to-follow instructions
    Install a new distributor cap.
    AUTODOC recommends:
    Replacement: distributor cap – VW PASSAT (3A2, 35I). Do not use excessive force during installation. This may damage the part.
  6. Step 8
    How to replace Distributor Cap on VW PASSAT (3A2, 35I) 1993: download PDF manuals and video instructions
    Fasten the distributor cap clips.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VW Passat B3/B4 Saloon (3A2, 35i) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VW PASSAT (3A2, 35I) Distributor Cap replacement - online guide
Tips & tricks for your VW PASSAT (3A2, 35I)
View more
  • How to change Ignition distributor cap on VW PASSAT (3A2, 35I) 2.0 - replacement tricks
    BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
  • Changing Ignition distributor cap VW Passat B4 35i 1.8 - Replacement Tips
    Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
  • Maintenance Hacks - VW PASSAT (3A2, 35I) 1.9 TDI Ignition distributor cap replacement guide
    5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
  • Replace Ignition distributor cap on VW Passat B4 35i - free video tips
    How to Fix P0401 ✅ error code Insufficient EGR flow
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VW PASSAT (3A2, 35I) Distributor Cap replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME