
Disclaimer
How to change camshaft position sensor on OPEL Movano A Van (X70) – replacement guide
downloads:
0
Views:
0
Important!
This replacement procedure can be used for:
OPEL Movano Van (X70) 2.5 D (FD), OPEL Movano Van (X70) 2.8 DTI (FD), OPEL Movano Van (X70) 2.2 DTI (FD), OPEL Movano Van (X70) 1.9 DTI (FD), OPEL Movano Van (X70) 1.9 DTI (FD), OPEL Movano Van (X70) 2.5 DTI (FD), OPEL Movano Van (X70) 2.5 DTi (FD), OPEL Movano Van (X70) 2.5 CDTI (FD), OPEL Movano Van (X70) 2.5 CDTI (FD), OPEL Movano Van (X70) 2.5 CDTI (FD) … View more
The steps may slightly vary depending on the car design.
OPEL Movano Van (X70) 2.5 D (FD), OPEL Movano Van (X70) 2.8 DTI (FD), OPEL Movano Van (X70) 2.2 DTI (FD), OPEL Movano Van (X70) 1.9 DTI (FD), OPEL Movano Van (X70) 1.9 DTI (FD), OPEL Movano Van (X70) 2.5 DTI (FD), OPEL Movano Van (X70) 2.5 DTi (FD), OPEL Movano Van (X70) 2.5 CDTI (FD), OPEL Movano Van (X70) 2.5 CDTI (FD), OPEL Movano Van (X70) 2.5 CDTI (FD) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Camshaft Sensor for Movano Van (X70) and other OPEL models
Alternative products

Wire brush
All-purpose cleaning spray
Electronic spray
Torque wrench
10 mm socket
Ratchet wrench
Mounting lever
Paper towels
Fender cover
Car lift or inspection pit
Replacement: camshaft position sensor – OPEL MOVANO Box (F9). AUTODOC experts recommend:
- All the work should be carried out with the ignition switched off.
Replacement: camshaft position sensor – OPEL MOVANO Box (F9). Recommended sequence of steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to avoid damaging the paintwork and plastic parts of the car.Step 3
Clean the mounting area of the camshaft position sensor. Use an all-purpose cleaning spray. - Step 4
Detach the connector of the camshaft position sensor. - Step 5
Unscrew the fastener of the camshaft position sensor. Use a 10 mm socket. Use a ratchet wrench. - Step 6
Remove the fastening bolt. - Step 7
Remove the camshaft position sensor. - Step 8Clean the mounting seat of the camshaft position sensor. Use an all-purpose cleaning spray.Step 9
Wipe the mounting seat of the camshaft position sensor dry. Use a paper towel. - Step 10
Install the new camshaft position sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Movano A Van (X70) model
Popular maintenance tutorials for Opel Movano Van x70
Complete guides for changing the Camshaft position sensor on different OPEL MOVANO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL Movano Van (X70)
View more
How to make an injector test bench yourself
How to align the timing marks correctly on an EA888 engine
5 tools that make car repair incredibly simple | AUTODOC tips
Top 5 reasons why your car squeals | AUTODOC Tips
Most commonly replaced car parts on OPEL MOVANO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME























