
Disclaimer
How to change brake drum on VW SANTANA (32B) – replacement guide
downloads:
1
Views:
6

Recommended replacement interval for the part category Brake drum : 100000 km
Important!
This replacement procedure can be used for:
VW SANTANA (32B) 2.0, VW SANTANA (32B) 1.9, VW SANTANA (32B) 1.8 … View more
The steps may slightly vary depending on the car design.
VW SANTANA (32B) 2.0, VW SANTANA (32B) 1.9, VW SANTANA (32B) 1.8 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Brake Drum for SANTANA (32B) and other VW models
Brake drum
Alternative products

Wire brush
All-purpose cleaning spray
Multipurpose grease
Copper grease
Torque wrench
Combination spanner #10
Drive socket # 24
Wheel impact socket #17
Ratchet wrench
Hammer
Crow bar
Wheel chock
AUTODOC recommends:
- Replace the brake drums on VW SANTANA (32B) in pair for the rear axle. Disregarding the parts state. It ensures even braking.
- The replacement procedure is identical for the right and left brake drums on the same axle.
- When replacing the brake drums, be sure to also change the brake shoes.
- Please note: all work on the car – VW SANTANA (32B) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Engage the parking brake lever.
- Step 2Loosen the parking brake cable. Use a combination spanner #10.
- Step 3Secure the wheels with chocks.Step 4Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 5Raise the rear of the car and secure on supports.Step 6Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VW SANTANA (32B)
- Step 7Remove the wheel.
- Step 8Clean the brake drum. Use a wire brush. Use all-purpose cleaning spray.
- Step 9Remove the wheel hub nut cap. Use a crowbar. Use a hammer.
- Step 10Remove the cotter pin securing the hub nut. Use a crowbar. Use a hammer.
- Step 11Unscrew the hub nut. Use a drive socket #24. Use a ratchet wrench.
- Step 12Remove the brake drum assembled with the wheel hub bearing.
- Step 13Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
- Step 14Treat the wheel hub in the area where it contacts the brake drum. Use a multipurpose grease.
- Step 15Install the new brake drum assembled with the wheel hub bearing.
- Step 16Install the wheel.AUTODOC recommends:Important! Hold the wheel while screwing in the fastening bolts. VW SANTANA (32B)
- Step 17Screw in the wheel bolts. Use wheel impact socket #17.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Santana Saloon (32B) model
Popular maintenance tutorials for VW Santana 32B
Complete guides for changing the Drum brakes on different VW SANTANA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW SANTANA (32B)
View more
- Top 5 brake repair mistakes | AUTODOC tips
- How to easily repair a punctured tyre | AUTODOC tips
- Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
- Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
Most commonly replaced car parts on VW SANTANA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME