Disclaimer
How to change brake drum on VW Golf 3 – replacement guide
downloads:
23
Views:
462
Recommended replacement interval for the part category Brake drum : 100000 km
Important!
This replacement procedure can be used for:
VW GOLF III (1H1) 1.9 TD, GTD, VW GOLF III (1H1) 1.9 TDI, VW GOLF III (1H1) 1.4, VW GOLF III (1H1) 1.6, VW GOLF III (1H1) 1.8, VW GOLF III (1H1) 1.8, VW GOLF III (1H1) 1.8 Syncro (1HX1), VW GOLF III (1H1) 1.4, VW GOLF III (1H1) 1.6, VW GOLF III (1H1) 1.9 SDI … View more
The steps may slightly vary depending on the car design.
VW GOLF III (1H1) 1.9 TD, GTD, VW GOLF III (1H1) 1.9 TDI, VW GOLF III (1H1) 1.4, VW GOLF III (1H1) 1.6, VW GOLF III (1H1) 1.8, VW GOLF III (1H1) 1.8, VW GOLF III (1H1) 1.8 Syncro (1HX1), VW GOLF III (1H1) 1.4, VW GOLF III (1H1) 1.6, VW GOLF III (1H1) 1.9 SDI … View more
The steps may slightly vary depending on the car design.
How to change rear brake drum on VOLKSWAGEN GOLF 3 (1H1) [TUTORIAL AUTODOC]

All the parts you need to replace – Brake Drum for GOLF III (1H1) and other VW models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Multipurpose grease
Copper grease
Torque wrench
Drive socket # 24
Wheel impact socket #17
Ratchet wrench
Tap wrench
Hammer
Flat Screwdriver
Water pump pliers
Pliers
Rubber mallet
Crow bar
Wheel chock
Replacement: brake drum – VW Golf 3. Tip from AUTODOC experts:
- Replace the brake drums on VW Golf 3 in pair for the rear axle. Disregarding the parts state. It ensures even braking.
- The replacement procedure is identical for the right and left brake drums on the same axle.
- When replacing the brake drums, be sure to also change the brake shoes.
- All work should be done with the engine stopped.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3
Raise the rear of the car and secure on supports. - Step 4
Unscrew the wheel bolts.Replacement: brake drum – VW Golf 3. AUTODOC experts recommend:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Remove the wheel hub nut cap. Use a crowbar. Use a hammer. - Step 7
Remove the cotter pin securing the hub nut. Use a crowbar. - Step 8
Unscrew the wheel hub axle nut. Use a drive socket #24. Use a tap wrench. - Step 9
Remove the brake drum. Use a flat screwdriver. - Step 10
Clean the stub axle. Use a wire brush. Treat the contacting surface. Use copper grease. - Step 11
Compress the wheel cylinder. Use water pump pliers. - Step 12
Move the parking brake shoes against the drum. Use pliers. - Step 13
Install a brake drum. - Step 14
Treat the stub axle. Use a multipurpose grease. - Step 15
Screw the wheel hub axle nut. Use a drive socket #24. Use a ratchet wrench. - Step 16
Install the wheel.AUTODOC recommends:Important! Hold the wheel while screwing in the fastening bolts. VW Golf 3 - Step 17
Screw in the wheel bolts. Use wheel impact socket #17.Replacement: brake drum – VW Golf 3. Professionals recommend:Align the brake drum.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Golf III Hatchback (1H1) model
Popular maintenance tutorials for Golf 3
Complete guides for changing the Drum brakes on different VW GOLF models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW GOLF III (1H1)
View more
Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC
7 signs of faulty fuel injectors | AUTODOC tips
DIY brake caliper restoration | AUTODOC tips
Fuse Replacement Made Simple: Step-by-Step Guide | AUTODOC
Most commonly replaced car parts on VW GOLF
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























