
Disclaimer
How to change brake drum on FIAT TEMPRA (159) – replacement guide
downloads:
3
Views:
35

Recommended replacement interval for the part category Brake drum : 100000 km
Important!
This replacement procedure can be used for:
FIAT TEMPRA (159) 1.9 TD (159.CU, 159.AU, 159.AI, 159.BI), FIAT TEMPRA (159) 1.4 i.e. (159.AC, 159.AX), FIAT TEMPRA (159) 1.6 i.e. (159.AS, 159.AT), FIAT TEMPRA (159) 1.6 i.e. (159.AJ), FIAT TEMPRA (159) 1.4 i.e. (159.AA), FIAT TEMPRA (159) 1.9 D (159.AG), FIAT TEMPRA (159) 1.6 i.e. (159.AJ) … View more
The steps may slightly vary depending on the car design.
FIAT TEMPRA (159) 1.9 TD (159.CU, 159.AU, 159.AI, 159.BI), FIAT TEMPRA (159) 1.4 i.e. (159.AC, 159.AX), FIAT TEMPRA (159) 1.6 i.e. (159.AS, 159.AT), FIAT TEMPRA (159) 1.6 i.e. (159.AJ), FIAT TEMPRA (159) 1.4 i.e. (159.AA), FIAT TEMPRA (159) 1.9 D (159.AG), FIAT TEMPRA (159) 1.6 i.e. (159.AJ) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Brake Drum for TEMPRA (159) and other FIAT models
Brake drum
Alternative products

Wire brush
Copper grease
Drive socket # 12
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hammer
Flat screwdriver
Wheel chock
Replacement: brake drum – FIAT TEMPRA (159). AUTODOC experts recommend:
- Replace the brake drums on FIAT TEMPRA (159) in pair for the rear axle. Disregarding the parts state. It ensures even braking.
- The replacement procedure is identical for the right and left brake drums on the same axle.
- When replacing the brake drums, be sure to also change the brake shoes.
- Warning! Shut down the engine before starting any work – FIAT TEMPRA (159).
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Unscrew the brake fluid reservoir cap. Secure the wheels with chocks.
- Step 3Loosen the wheel mounting bolts. Use wheel impact socket #17.Step 4Raise the rear of the car and secure on supports.Step 5Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FIAT TEMPRA (159)
- Step 6Remove the wheel.
- Step 7Fully lower the parking brake lever.Step 8Unscrew the brake drum fastening.
- Step 9Use a drive socket #12. Use a ratchet wrench.
- Step 10Remove the brake drum.
- Step 11Remove the hub bearing protection cap. Use a flat screwdriver. Use a hammer.Replacement: brake drum – FIAT TEMPRA (159). AUTODOC recommends:Some cars are not equipped with wheel hub caps.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Tempra Saloon (159) model
Popular maintenance tutorials for Fiat Tempra 159
Complete guides for changing the Drum brakes on different FIAT TEMPRA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FIAT TEMPRA (159)
View more
- Which Coolant is Best? Comparison Test | AUTODOC
- How to Get the Best Deals on Car Parts | Save Money with AUTODOC
- Top 5 mistakes when replacing spark plugs | AUTODOC tips
- Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
Most commonly replaced car parts on FIAT TEMPRA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME