Disclaimer
How to change air filter on PEUGEOT 208 Van (CR_) – replacement guide
downloads:
1
Views:
9
Recommended replacement interval for the part category Air filter : 4 year / 50000 km
Important!
This replacement procedure can be used for:
PEUGEOT 208 Van (CR_) 1.2 VTI / PureTech (CRHMZ6, CRHMRP) … View more
The steps may slightly vary depending on the car design.
PEUGEOT 208 Van (CR_) 1.2 VTI / PureTech (CRHMZ6, CRHMRP) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Air Filter for 208 Van (CR_) and other PEUGEOT models
Alternative products

Drive socket # 7
Drive socket # 10
Ratchet wrench
Phillips screwdriver
Microfibre towel
Fender cover
Replacement: air filter – PEUGEOT 208 Box. AUTODOC experts recommend:
- Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
- All work should be done with the engine stopped.
Replacement: air filter – PEUGEOT 208 Box. Recommended sequence of steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Disconnect the crankcase ventilation hose from the air duct. - Step 4
Unscrew the clamp fastening the engine air filter housing to the throttle body. Use a drive socket #7. - Step 5
Unscrew the filter housing fastening bolts. Use a drive socket #10. Use a ratchet wrench. - Step 6
Disconnect the air intake pipe from the air filter housing. - Step 7
Remove the air filter housing. - Step 8
Undo the fastening screws of the air filter cover. Use a Phillips screwdriver. - Step 9
Take off the filter lid. - Step 10
Remove the filter element from the filter housing. - Step 11
Clean the air filter cover and housing.Replacement: air filter – PEUGEOT 208 Box. Tip from AUTODOC experts:Before cleaning the air filter cover and housing, cover the air duct parts, mass airflow sensor (if available), throttle valve with a clean cloth. - Step 12
Insert a new filter element into the filter housing. Make sure that the filter edge fits tight to the housing.AUTODOC recommends:Replacement: air filter – PEUGEOT 208 Box. Be sure to position the filtering element correctly. Avoid misalignment.Take care to only use quality filters.During installation, make sure to prevent dust and dirt from getting into the air filter housing.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 208 Van (CR_) model
Popular maintenance tutorials for Peugeot 208 Van
Complete guides for changing the Air filters on different PEUGEOT 208 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 208 Van (CR_)
View more
#TPMS Explained: Why Your Light is On and How to Respond Safely
The Ultimate Guide to Engine Bay Cleaning | AUTODOC
How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
Why Checking Your Oil is Crucial for Engine Performance
Most commonly replaced car parts on PEUGEOT 208
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























