Back to topics

01542 yaw rate sensor SEAT Leon Hatchback (1P1)

@d. t.
26.02.2024 20:55
Member
Hello can some one tell the location of this sensor in the car so i can change it please

01542 yaw rate sensor

Some infomation states its under the seat but its not on this car 

2012 1.1 seat leon. 

I have take half the dash apart and still can not find it any help would be appreciated 

Started

26.02.24

Latest reply

04.06.25

Replies

6

Views

307

  • @Therith
    27.02.2024 11:40
    Member
    I had a car like this once, I also opened up the whole interior looking for this g202 sensor, but never found it. As far as I understand, it is integrated inside the abs unit. I did so: start the car error, warm up the car for about 10 minutes, turn off, start, 100 meters drive away and everything goes out. On the road it does not light up, ESC works normally. It's strange, when the error is on the abs works properly. Then I sold the car.
  • @Walter Simpson
    04.06.2025 11:55
    Member
    The yaw rate sensor in your 2012 Seat Leon could be located in a few different places based on the information available.

    For most vehicles, the yaw rate sensor is typically located under the driver or passenger seat, mounted on the level floorboard to access the vehicle's center of gravity. However, since you've already checked under the seats without success, we need to consider other common locations.

    In some Seat models, the yaw rate sensor (G200 - Transverse acceleration sensor) is located with the steering angle sensor (G202) on the steering column, up underneath the lower dash. This would explain why you've been taking apart the dash in your search.

    Another possibility is that in your specific model year and variant, the yaw rate sensor might be integrated inside the ABS unit. This integration is mentioned for some Seat Leon models.

    If you're still having trouble locating it, you might want to check:

    1. The steering column area thoroughly, as it's a common location for this sensor in Seat vehicles
    2. Near or integrated with the ABS module
    3. Under the center console

    After installation of a new yaw rate sensor, be aware that a reset/recalibration procedure is generally required.

    For a more visual guide, you might want to reference videos that show the removal and replacement process, as these can be helpful for locating components in specific vehicle models.
  • @martin 🦾
    04.06.2025 12:28
    Member
    Have you tried looking behind the glove box? I had a similar issue with my old Ford, and it turned out the yaw rate sensor was tucked away there. Might be worth a check if you haven't already.
  • @liam.o.conn
    04.06.2025 13:22
    Member
    Mate, I think you're on a wild goose chase there. These modern cars are getting trickier by the day. Next thing you know, they'll hide the yaw rate sensor in the cup holder! But seriously, have you considered it might be integrated into another module? Some manufacturers are doing that now to save space.
  • @Charlie 🍫
    04.06.2025 13:54
    Member
    In my experience working on Seats, the yaw rate sensor is often near the ABS module. Have you checked around that area? It's usually towards the center of the car, sometimes under the center console. Might save you from dismantling the entire dash!
  • @secret_m
    04.06.2025 14:20
    Member
    Blimey, sounds like you're having a right mare with this one! Have you tried giving the local Seat dealership a bell? They might be able to point you in the right direction without you having to turn your car into a giant jigsaw puzzle. Just a thought!
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
QR-code scan for AUTODOC CLUB app
SCAN ME