Multiple faults SEAT Leon III Hatchback (5F1) (09.2012 - ...)
TOYOTA 4 RUNNER (KZN18_, VZN18_, RZN18_) 2.7 4WD (RZN185_)@Jessica_L19.02.2025 08:04AUTODOC expertIt is difficult to give a definite answer, it shows that there is a problem in the circuit and indicates the circuit. But the problem is that there are many connections and devices in the circuit. It is necessary to check the whole circuit and possibly replace parts in the circuit one by one using the method of elimination. Each error has its own manual of checking. It is necessary to address to the service master and to carry out diagnostics for search of the reason and physically see what could be damaged under the car.- AUDI A4 Avant (8E5, B6) 1.9 TDIM. W.25.02.2025 20:08MemberDid you find any diagnosis for this? I’m currently having the same problem with my Leon.
- NISSAN QASHQAI / QASHQAI +2 (J10, JJ10) 2.0 dCi Allrad@user_321530926.02.2025 20:17M. W.MemberNothing as yet but from what I have found it’s either a connector or the mechatronic box has failed which I’m hoping it’s not as it’s a fortune to fix. Got a few things to check and if I find issue I will let you know
- AUDI A4 Avant (8E5, B6) 1.9 TDIM. W.04.03.2025 12:39@user_3215309MemberNo worries, mine has been in a garage for the last week and they’ve not found anything as yet. It’s going to a different garage today so I’ll update you if they find anything. The previous garage advised that using a software called Odis would be the easiest way to find the fault. The new garage has this so if they find the problem I’ll let you know what they replace and how much it costs me :)
- NISSAN QASHQAI / QASHQAI +2 (J10, JJ10) 2.0 dCi Allrad@user_321530904.03.2025 14:08M. W.MemberCheers
- NISSAN QASHQAI / QASHQAI +2 (J10, JJ10) 2.0 dCi Allrad@user_321530902.05.2025 20:49M. W.MemberHello did you find out what the issue was

Automatic, Drives for about 15 Minutes then cuts out get multiple warning lights including, ESP, TPMS, EPC.
Car cuts out and won’t start again due to car thinking it’s in drive states please put car into P/N but already in park.
RAC recovered and got the following Faults:
U042300 Invalid Data Received From Instrument Panel Cluster Control Module
U010100 Lost Communication with TCM
C114602 Tire Pressure Monitoring System (TPMS) Signal malfunction
All started after going over a pot hole
Just wondering if anyone has any ideas on what it could be that’s causing the issue and where to look