How to carry out replacement: Track Rod End 1.9 D Seat Inca 6K9
Disclaimer
Change Seat Inca 6K9 1.9 D Track Rod End yourself – manuals and video tutorials

How to change track rod end on SEAT Inca (6K9) – replacement guide

downloads: 0
Views: 3
Download your free tutorial and fix SEAT Inca (6K9) 1.6 problems yourself Download for free 1.32 MB Track Rod End for Seat Inca 6K9 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
SEAT Inca (6K9) 1.9 TDI … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for Inca (6K9) and other SEAT models
Alternative products
How to change Track rod end on Seat Inca 6K9 1.9 D – step-by-step instructions for straightforward car repair Track rod end
Tools
Replacement: track rod end – SEAT INCA (6K9). List of the tools you'll need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Torque wrench
Combination spanner #19
Combination spanner #22
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Ball joint puller
Vernier caliper
Wheel chock
Buy tools
Replacement: track rod end – SEAT INCA (6K9). Tip from AUTODOC:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • Please note: all work on the car – SEAT INCA (6K9) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Track Rod End on Seat Inca 6K9 1995 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the car.
    Replacement: track rod end – SEAT INCA (6K9). Tip:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace SEAT Inca (6K9) 1.9 D 1996 Track Rod End - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. SEAT INCA (6K9)
  3. Step 5
    Seat Inca 6K9 1.9 SDI 1997 Track Rod End replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Track Rod End on SEAT Inca (6K9) 1.6 i 1998 by yourself
    Clean all tie rod end connections. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove SEAT INCA 1.7 D 1999 Track Rod End - online easy-to-follow instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  6. Step 8
    How to replace Track Rod End on SEAT Inca (6K9) 2000: download PDF manuals and video instructions
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #19. Use a combination spanner #22.
  7. Step 9
    How hard is it to do yourself: Track Rod End replacement on Seat Inca 6K9 1.9 TDI 2001 - download illustrated guide
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #19. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Track Rod End on SEAT INCA 2002? This free workshop manual will help you to do it yourself
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  9. Step 11
    Changing of Track Rod End on Seat Inca 6K9 2003 won't be an issue if you follow this illustrated step-by-step guide
    Screw the end out of the tie rod.
  10. Step 12
    SEAT INCA 1.9 D Track Rod End replacement: online guides and video tutorials
    Clean the mounting seats of the tie rod end. Use a wire brush. Use all-purpose cleaning spray.
  11. Step 13
    Replacing Track Rod End on Seat Inca 6K9 1996 1.9 D by yourself
    Treat the mounting seats of the tie rod end. Use copper grease.
  12. Step 14
    Inca (6K9) 1.7 D 1997 Track Rod End DIY replacement workshop manual
    Screw on a new tie rod end. Use a vernier caliper.
    Replacement: track rod end – SEAT INCA (6K9). AUTODOC experts recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Inca (6K9) model

Seat Inca 6K9 tyre size

Popular maintenance tutorials for Seat Inca 6K9

More manuals for Seat Inca 6K9

Complete guides for changing the Tie rod end on different SEAT INCA models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SEAT Inca (6K9) Track Rod End replacement - online guide
Tips & tricks for your SEAT Inca (6K9)
View more
  • How to change Tie rod end on SEAT Inca (6K9) 1.4 i - replacement tricks
    How to make an injector test bench yourself
    5K views
    Published on: 30/01/2025
  • Changing Outer tie rod Seat Inca 6K9 1.9 D - Replacement Tips
    Save Money on Fuel with These Easy Tips | AUTODOC
    5K views
    Published on: 27/09/2022
  • Maintenance Hacks - SEAT Inca (6K9) 1.9 SDI Track rod end ball joint replacement guide
    Don’t Replace, Restore: Fixing Damaged Threads at Home
    8K views
    Published on: 04/05/2023
  • Replace Outer tie rod end on Seat Inca 6K9 - free video tips
    5 mistakes when replacing consumables
    5K views
    Published on: 06/02/2025

Most commonly replaced car parts on SEAT INCA

Professional manuals for the most common SEAT models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SEAT Inca (6K9) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME