Important!
This replacement procedure can be used for:
RENAULT MASTER II Bus (JD) 2.5 D, RENAULT MASTER II Bus (JD) 2.8 dTI, RENAULT MASTER II Bus (JD) 2.2 dCI, RENAULT MASTER II Bus (JD) 1.9 dTI, RENAULT MASTER II Bus (JD) 2.5 dCi, RENAULT MASTER II Bus (JD) 1.9 dCi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for MASTER II Bus (JD) and other RENAULT models
Alternative products
How to change Track rod end on Renault Master II Minibus 2.5 dCi – step-by-step instructions for straightforward car repair Track rod end
Tools
Replacement: track rod end – RENAULT MASTER II Bus (JD). Tools you might need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Ceramic grease
Torque wrench
15 mm combination spanner
13 mm socket
22 mm socket
24 mm wheel impact socket
Ratchet wrench or power tool for removal/installation of threaded fasteners
Tommy bar
Vernier caliper
Ball joint separator
Car lift or jack with jack stands, and wheel chocks
Replacement: track rod end – RENAULT MASTER II Bus (JD). Professionals recommend:
  • Replace the tie rod ends in pairs.
  • The replacement procedure is identical for the left and right tie rod ends.
  • All the work should be carried out with the engine switched off.
Replacement: track rod end – RENAULT MASTER II Bus (JD). Recommended sequence of steps:
  1. Step 1
    How to change Track Rod End on Renault Master II Minibus 1998 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace RENAULT MASTER II Bus (JD) 2.5 dCi 1999 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel fasteners. Use a 24 mm wheel impact socket. Use a tommy bar.
  3. Step 3
    Raise the car.
    Replacement: track rod end – RENAULT MASTER II Bus (JD). AUTODOC recommends:
    If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.
    Step 4
    Renault Master II Minibus 2.2 dCI 2000 Track Rod End replacement: free workshop manuals
    Unscrew the wheel fasteners.
    Caution!
    To avoid injury, hold up the wheel when unscrewing the fasteners.
  4. Step 5
    Changing Track Rod End on RENAULT MASTER II Bus (JD) 2.5 D 2001 by yourself
    Remove the wheel.
  5. Step 6
    How to remove RENAULT MASTER 1.9 dCi 2002 Track Rod End - online easy-to-follow instructions
    Clean all tie rod end connections. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on RENAULT MASTER II Bus (JD) 2003: download PDF manuals and video instructions
    Unscrew the nut connecting the tie rod end to the steering knuckle. Use a 22 mm socket. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Renault Master II Minibus 2.5 dCi 2004 - download illustrated guide
    Loosen the bolt connecting the tie rod end to the tie rod. Use an 13 mm socket. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Track Rod End on RENAULT MASTER 2005? This free workshop manual will help you to do it yourself
    Measure and note down the length of the exposed portion of the tie rod thread or the number of turns the tie rod end made when being unscrewed to prevent wheel misalignment during reassembly. Use a vernier caliper.
  9. Step 10
    Changing of Track Rod End on Renault Master II Minibus 2006 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle. Use a ball joint separator.
  10. Step 11
    RENAULT MASTER 2.8 dTI Track Rod End replacement: online guides and video tutorials
    Unscrew the tie rod end from the tie rod.
  11. Step 12
    Replacing Track Rod End on Renault Master II Minibus 2008 2.5 dCi by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use an all-purpose cleaning spray.
  12. Step 13
    MASTER II Bus (JD) 1.9 dCi 2009 Track Rod End DIY replacement workshop manual
    Screw on a new tie rod end.
    Replacement: track rod end – RENAULT MASTER II Bus (JD). Tip from AUTODOC experts:
    When installing the tie rod end, remember to maintain the same length of the exposed tie rod thread or turn the tie rod end the same number of times.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Master II Minibus model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY RENAULT MASTER II Bus (JD) Track Rod End replacement - online guide
Tips & tricks for your RENAULT MASTER II Bus (JD)
View more
  • How to change Tie rod end on RENAULT MASTER II Bus (JD) 2.8 dTI - replacement tricks
    How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
  • Changing Outer tie rod Renault Master II Minibus 2.5 dCi - Replacement Tips
    What to do if your car’s bonnet won’t open | AUTODOC tips
  • Maintenance Hacks - RENAULT MASTER II Bus (JD) 2.2 dCI Track rod end ball joint replacement guide
    Fuse Replacement Made Simple: Step-by-Step Guide | AUTODOC
  • Replace Outer tie rod end on Renault Master II Minibus - free video tips
    Cold starts | 5 mistakes that wreck your car
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
RENAULT MASTER II Bus (JD) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME