Important!
This replacement procedure can be used for:
PORSCHE Macan (95B) 3.0 S, PORSCHE Macan (95B) 3.6 Turbo, PORSCHE Macan (95B) 3.0 S Diesel, PORSCHE Macan (95B) 3.0 S Diesel, PORSCHE Macan (95B) 3.0 S Diesel, PORSCHE Macan (95B) 2.0, PORSCHE Macan (95B) 3.0 S Diesel, PORSCHE Macan (95B) 3.0 GTS, PORSCHE Macan (95B) 2.0, PORSCHE Macan (95B) 3.6 Turbo, PORSCHE Macan (95B) 2.0, PORSCHE Macan (95B) 3.0 S, PORSCHE Macan (95B) 2.9 Turbo AWD (95BCI1) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for Macan (95B) and other PORSCHE models
Tools
Replacement: track rod end – PORSCHE MACAN. Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #21
Combination spanner #24
Drive socket # 21
Wheel impact socket #17
Torque wrench
Vernier caliper
Wheel chock
Replacement: track rod end – PORSCHE MACAN. AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • Please note: all work on the car – PORSCHE MACAN – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Track Rod End on Porsche Macan 95B 2014 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace PORSCHE Macan (95B) 3.0 S Diesel 2015 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Porsche Macan 95B 3.0 S 2016 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – PORSCHE MACAN. Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on PORSCHE Macan (95B) 2.0 2017 by yourself
    Remove the wheel.
  5. Step 6
    How to remove PORSCHE MACAN 3.0 GTS 2018 Track Rod End - online easy-to-follow instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on PORSCHE Macan (95B) 2019: download PDF manuals and video instructions
    Unscrew the end fastening nut to the steering knuckle. Use a combination spanner #21.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Porsche Macan 95B 3.0 S 2020 - download illustrated guide
    Clean the lock nut that connects the tie rod to the tie rod end. Use a wire brush. Use WD-40 spray.
  8. Step 9
    Need to know how to renew Track Rod End on PORSCHE MACAN 2021? This free workshop manual will help you to do it yourself
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  9. Step 10
    Changing of Track Rod End on Porsche Macan 95B 2022 won't be an issue if you follow this illustrated step-by-step guide
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #24 (2 pieces).
  10. Step 11
    PORSCHE MACAN 2.0 Track Rod End replacement: online guides and video tutorials
    Disconnect the tie rod end from the steering knuckle.
  11. Step 12
    Replacing Track Rod End on Porsche Macan 95B 2024 3.0 S Diesel by yourself
    Screw the end out of the tie rod.
  12. Step 13
    Macan (95B) 3.0 GTS 2014 Track Rod End DIY replacement workshop manual
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  13. Step 14
    How to change Track Rod End on PORSCHE Macan (95B) 2015 - tips and tricks
    Screw on a new tie rod end.
    Replacement: track rod end – PORSCHE MACAN. AUTODOC experts recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  14. Step 15
    Step-by-step recommendations for DIY replacement Porsche Macan 95B 2016 3.0 GTS Track Rod End
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PORSCHE Macan (95B) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PORSCHE Macan (95B) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PORSCHE Macan (95B) Track Rod End replacement - online guide
Tips & tricks for your PORSCHE Macan (95B)
View more
  • How to change Tie rod end on PORSCHE Macan (95B) 3.6 Turbo - replacement tricks
    DIY brake caliper restoration | AUTODOC tips
  • Changing Outer tie rod Porsche Macan 95B 3.0 S Diesel - Replacement Tips
    How to detect vacuum leaks using a smoke machine | AUTODOC
  • Maintenance Hacks - PORSCHE Macan (95B) 3.0 S Track rod end ball joint replacement guide
    Causes of a worn car boot damper | AUTODOC
  • Replace Outer tie rod end on Porsche Macan 95B - free video tips
    What to check when buying a used car | AUTODOC tips

Professional manuals for the most common PORSCHE models