Important!
This replacement procedure can be used for:
CITROËN XSARA (N1) 1.8 i, CITROËN XSARA (N1) 1.8 i Aut., CITROËN XSARA (N1) 1.8 i 16V, CITROËN XSARA (N1) 1.4 i, CITROËN XSARA (N1) 1.5 D, CITROËN XSARA (N1) 1.6 i, CITROËN XSARA (N1) 1.9 TD, CITROËN XSARA (N1) 1.8 D, CITROËN XSARA (N1) 1.9 D, CITROËN XSARA (N1) 1.9 SD, CITROËN XSARA (N1) 1.9 D, CITROËN XSARA (N1) 2.0 16V, CITROËN XSARA (N1) 2.0 HDi 90, CITROËN XSARA (N1) 1.6 16V, CITROËN XSARA (N1) 2.0 16V, CITROËN XSARA (N1) 2.0 HDi 109, CITROËN XSARA (N1) 1.4 HDi, CITROËN XSARA (N1) 1.8 VTS, CITROËN XSARA (N1) 1.4 LPG View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for XSARA (N1) and other CITROËN models
Tools
Replacement: track rod end – CITROËN XSARA (N1). Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #19
Combination spanner #21
Drive socket # 17
Wheel impact socket #19
Torque wrench
Tap wrench
Vernier caliper
Ball joint puller
Wheel chock
Replacement: track rod end – CITROËN XSARA (N1). AUTODOC experts recommend:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • During the installation process, use only new bolts and nuts.
  • Please note: all work on the car – CITROËN XSARA (N1) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Track Rod End on Citroën Xsara N1 1997 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace CITROËN XSARA (N1) 2.0 HDi 90 1998 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Citroën Xsara N1 1.6 16V 1999 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – CITROËN XSARA (N1). Tip from AUTODOC:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on CITROËN XSARA (N1) 1.9 TD 2000 by yourself
    Remove the wheel.
  5. Step 6
    How to remove CITROËN XSARA 2.0 HDi 109 2001 Track Rod End - online easy-to-follow instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on CITROËN XSARA (N1) 2002: download PDF manuals and video instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Citroën Xsara N1 1.9 D 2003 - download illustrated guide
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #21 (2 pieces).
  8. Step 9
    Need to know how to renew Track Rod End on CITROËN XSARA 2004? This free workshop manual will help you to do it yourself
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #17. Use a tap wrench.
  9. Step 10
    Changing of Track Rod End on Citroën Xsara N1 2005 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  10. Step 11
    CITROËN XSARA 1.8 i 16V Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod.
  11. Step 12
    Replacing Track Rod End on Citroën Xsara N1 1998 2.0 HDi 90 by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  12. Step 13
    XSARA (N1) 2.0 HDi 109 1999 Track Rod End DIY replacement workshop manual
    Screw on a new tie rod end.
    Replacement: track rod end – CITROËN XSARA (N1). AUTODOC recommends:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Xsara Hatchback (N1) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
CITROËN XSARA (N1) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY CITROËN XSARA (N1) Track Rod End replacement - online guide
Tips & tricks for your CITROËN XSARA (N1)
View more
  • How to change Tie rod end on CITROËN XSARA (N1) 1.4 i - replacement tricks
    The most common problems when buying a used car | AUTODOC
  • Changing Outer tie rod Citroën Xsara N1 2.0 HDi 90 - Replacement Tips
    How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
  • Maintenance Hacks - CITROËN XSARA (N1) 1.6 16V Track rod end ball joint replacement guide
    4 reasons why your CHECK ENGINE light is on | AUTODOC tips
  • Replace Outer tie rod end on Citroën Xsara N1 - free video tips
    What to do if your car's air conditioning isn't working properly | AUTODOC tips