Important!
This replacement procedure can be used for:
CITROËN Berlingo / Berlingo First Van (M_) 1.1 i (MAHDZ, MBHDZ, MBHFX), CITROËN Berlingo / Berlingo First Van (M_) 1.4 i (MBKFX, MBKFW), CITROËN Berlingo / Berlingo First Van (M_) 1.8 D (MBA9A, MCA9A), CITROËN Berlingo / Berlingo First Van (M_) 1.9 D 70 (MBWJZ, MCWJZ), CITROËN Berlingo / Berlingo First Van (M_) 1.9 D 70 4WD (MBWJZ, MCWJZ), CITROËN Berlingo / Berlingo First Van (M_) 2.0 HDI 90 (MBRHY, MCRHY), CITROËN Berlingo / Berlingo First Van (M_) 1.4 i bivalent (MBKFW), CITROËN Berlingo / Berlingo First Van (M_) 1.4 bivalent, CITROËN Berlingo / Berlingo First Van (M_) 1.8 i, CITROËN Berlingo / Berlingo First Van (M_) 2.0 HDI 90 4WD (MBRHY, MCRHY), CITROËN Berlingo / Berlingo First Van (M_) 1.6 16V (MBNFU), CITROËN Berlingo / Berlingo First Van (M_) 1.6 HDI 75 (MB9HW), CITROËN Berlingo / Berlingo First Van (M_) Electric, CITROËN Berlingo / Berlingo First Van (M_) 1.4 BiFuel (MBKFXB, MCKFXB) View more

The steps may slightly vary depending on the car design.

How to change tie rod end on CITROËN BERLINGO M [TUTORIAL AUTODOC]

video
All the parts you need to replace – Track Rod End for Berlingo / Berlingo First Van (M_) and other CITROËN models
Tools
Replacement: track rod end – Citroën Berlingo M. List of the tools you'll need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Brake cleaner
Ceramic grease
Copper grease
Torque wrench
Combination spanner #16
Combination spanner #22
Drive socket # 17
Wheel impact socket #19
Ball joint puller
Ratchet wrench
Vernier caliper
Wheel chock
Replacement: track rod end – Citroën Berlingo M. Tip from AUTODOC experts:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • Please note: all work on the car – Citroën Berlingo M – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Track Rod End on Citroën Berlingo M 1996 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  2. Step 3
    How to replace CITROËN Berlingo / Berlingo First Van (M_) 1.9 D 70 1997 Track Rod End - step-by-step manuals and video guides
    Raise the car.
    Replacement: track rod end – Citroën Berlingo M. AUTODOC recommends:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
  3. Step 4
    Citroën Berlingo M 2.0 HDI 90 1998 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Citroën Berlingo M
  4. Step 5
    Changing Track Rod End on CITROËN Berlingo / Berlingo First Van (M_) 1.9 D 1999 by yourself
    Remove the wheel.
  5. Step 6
    How to remove CITROËN BERLINGO 1.4 i 2000 Track Rod End - online easy-to-follow instructions
    Clean all tie rod end connections. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on CITROËN Berlingo / Berlingo First Van (M_) 2001: download PDF manuals and video instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Citroën Berlingo M 1.8 D 2002 - download illustrated guide
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #16. Use a combination spanner #22.
  8. Step 9
    Need to know how to renew Track Rod End on CITROËN BERLINGO 2003? This free workshop manual will help you to do it yourself
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #17. Use a ratchet wrench.
  9. Step 10
    Changing of Track Rod End on Citroën Berlingo M 2004 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle.
    Replacement: track rod end – Citroën Berlingo M. Tip from AUTODOC experts:
    Use a ball joint puller if necessary.
  10. Step 11
    CITROËN BERLINGO 1.9 D 70 4WD Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod.
  11. Step 12
    Replacing Track Rod End on Citroën Berlingo M 2006 1.9 D 70 by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use all-purpose cleaning spray.
  12. Step 13
    Berlingo / Berlingo First Van (M_) 1.4 i 2007 Track Rod End DIY replacement workshop manual
    Treat the mounting seats of the tie rod end. Use copper grease.
  13. Step 14
    How to change Track Rod End on CITROËN Berlingo / Berlingo First Van (M_) 2008 - tips and tricks
    Screw on a new tie rod end. Use a vernier caliper.
    Replacement: track rod end – Citroën Berlingo M. AUTODOC experts recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  14. Step 15
    Step-by-step recommendations for DIY replacement Citroën Berlingo M 2009 1.4 i Track Rod End
    Connect the tie rod end to the steering knuckle.
  15. Step 16
    DIY replacement of Track Rod End on CITROËN Berlingo / Berlingo First Van (M_) 1.6 HDI 75 2010 is not an issue anymore with our step-by-step tutorial
    Screw on the fastening nut that connects the tie rod end to the steering knuckle. Use a drive socket #17. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Berlingo / Berlingo First I Van (M) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
CITROËN Berlingo / Berlingo First Van (M_) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY CITROËN Berlingo / Berlingo First Van (M_) Track Rod End replacement - online guide
Tips & tricks for your CITROËN Berlingo / Berlingo First Van (M_)
View more
  • How to change Tie rod end on CITROËN Berlingo / Berlingo First Van (M_) 1.6 HDI 75 - replacement tricks
    Top 5 reasons why your car squeals | AUTODOC Tips
  • Changing Outer tie rod Citroën Berlingo M 1.9 D 70 - Replacement Tips
    DIY brake caliper restoration | AUTODOC tips
  • Maintenance Hacks - CITROËN Berlingo / Berlingo First Van (M_) 2.0 HDI 90 Track rod end ball joint replacement guide
    How to choose the right engine oil for your car | AUTODOC
  • Replace Outer tie rod end on Citroën Berlingo M - free video tips
    What to do if your car heater isn't working | AUTODOC tips