
Disclaimer
How to change spark plugs on VAUXHALL Signum (Z03) – replacement guide
downloads:
1
Views:
15

Recommended replacement interval for the part category Spark plug : 8 year / 120000 km
Important!
This replacement procedure can be used for:
VAUXHALL Signum (Z03) 1.8, VAUXHALL Signum (Z03) 1.8 … View more
The steps may slightly vary depending on the car design.
VAUXHALL Signum (Z03) 1.8, VAUXHALL Signum (Z03) 1.8 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for Signum (Z03) and other VAUXHALL models
Spark plug
Alternative products

Electronic spray
High-temperature anti-seize lubricant
Torque wrench
Spark plug socket # 16
Torx bit T40
Ratchet wrench
Crow bar
Fender cover
Replacement: spark plugs – VAUXHALL SIGNUM. Tip from AUTODOC:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – VAUXHALL SIGNUM. Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Remove the engine cover.AUTODOC recommends:Replacement: spark plugs – VAUXHALL SIGNUM. Do not use excessive force when removing the part as this may damage it.
- Step 4Detach the connector from the ignition coil.
- Step 5Unscrew the ignition coil bolts. Use Torx T40. Use a ratchet wrench.
- Step 6Pry up the ignition coil. Use a crowbar.Step 7Take out the ignition coil from the spark plug well.
- Step 8Clean dirt, dust and debris from inside the spark plug wells.
- Step 9Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
- Step 10Take out the spark plugs.
- Step 11Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 12Install the new spark plugs into their mounting seats.
- Step 13Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – VAUXHALL SIGNUM. AUTODOC recommends:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Signum (Z03) model
Popular maintenance tutorials for VAUXHALL SIGNUM
Complete guides for changing the Engine spark plug on different VAUXHALL SIGNUM models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL Signum (Z03)
View more
- Top 5 possible reasons your car is shaking or vibrating
- How to unlock your car without a key | AUTODOC tips
- Deep interior cleaning | Car transformation by detailing
- Checking the starter without removing it | AUTODOC tips
Most commonly replaced car parts on VAUXHALL SIGNUM
Time to replace parts? Get even better deals in our Shop app.

SCAN ME