Important!
This replacement procedure can be used for:
VAUXHALL Signum (Z03) 1.8 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Coil for Signum (Z03) and other VAUXHALL models
Alternative products
How to change Ignition coil on VAUXHALL SIGNUM 1.9 CDTI 16V – step-by-step instructions for straightforward car repair Ignition coil
Tools
Replacement: ignition coil – VAUXHALL SIGNUM. Tools you need:
Electronic spray
Torque wrench
Torx bit T40
Ratchet wrench
Crow bar
Fender cover
Replacement: ignition coil – VAUXHALL SIGNUM. AUTODOC experts recommend:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • Please note: all work on the car – VAUXHALL SIGNUM – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on VAUXHALL SIGNUM 2003 - free PDF and video manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: ignition coil – VAUXHALL SIGNUM. Do not use excessive force when removing the part as this may damage it.
  2. Step 4
    How to replace VAUXHALL Signum (Z03) 1.9 CDTI 16V 2004 Ignition Coil - step-by-step manuals and video guides
    Detach the connector from the ignition coil.
  3. Step 5
    VAUXHALL SIGNUM 3.0 V6 CDTI 2005 Ignition Coil replacement: free workshop manuals
    Unscrew the ignition coil bolts. Use Torx T40. Use a ratchet wrench.
  4. Step 6
    Pry up the ignition coil. Use a crowbar.
    Step 7
    Changing Ignition Coil on VAUXHALL Signum (Z03) 1.8 2006 by yourself
    Take out the ignition coil from the spark plug well.
  5. Step 8
    How to remove VAUXHALL SIGNUM 1.9 CDTI 2007 Ignition Coil - online easy-to-follow instructions
    Clean dirt, dust and debris from inside the spark plug wells.
  6. Step 9
    How to replace Ignition Coil on VAUXHALL Signum (Z03) 2008: download PDF manuals and video instructions
    Install the new ignition coil to the spark plug well.
  7. Step 10
    How hard is it to do yourself: Ignition Coil replacement on VAUXHALL SIGNUM 2.0 DTI 2003 - download illustrated guide
    Tighten the ignition coil bolts. Use Torx T40. Use a torque wrench. Tighten it to 7 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Signum (Z03) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VAUXHALL Signum (Z03) Ignition Coil replacement - online guide
Tips & tricks for your VAUXHALL Signum (Z03)
View more
  • How to change Coil pack on VAUXHALL Signum (Z03) 2.0 i Turbo - replacement tricks
    Coolant comparison test | AUTODOC
  • Changing Ignition coil pack VAUXHALL SIGNUM 1.9 CDTI 16V - Replacement Tips
    DIY manual gearbox restoration | Drivetrain restoration – Part 3
  • Maintenance Hacks - VAUXHALL Signum (Z03) 3.0 V6 CDTI Ignition coils replacement guide
    Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
  • Replace Coil packs on VAUXHALL SIGNUM - free video tips
    Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VAUXHALL Signum (Z03) Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME