Recommended replacement interval for the part category Spark plug : 18 month / 30000 km

Important!

This replacement procedure can be used for:
VAUXHALL Frontera Mk I (A) Off-Road (U92) 2.0, VAUXHALL Frontera Mk I (A) Off-Road (U92) 2.2 i … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Spark Plug for Frontera Mk I (A) Off-Road (U92) and other VAUXHALL models

Alternative products

Spark plug

Replacement: spark plugs – VAUXHALL FRONTERA Mk I (A). List of the tools you'll need:

                      Electronic spray
                    
                      High-temperature anti-seize lubricant
                    
                      Torx bit T40
                    
                      Spark plug socket # 16
                    
                      Ratchet wrench
                    
                      Torque wrench
                    
                      Flat Screwdriver
                    
                      Fender cover

Buy tools

Replacement: spark plugs – VAUXHALL FRONTERA Mk I (A). AUTODOC experts recommend:

The replacement procedure is the same for all spark plugs.
All work should be done with the engine stopped.

Replacement: spark plugs – VAUXHALL FRONTERA Mk I (A). Recommended sequence of steps:

Step 1

Open the hood.

Step 2

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.

Step 3

Undo the engine cover screws. Use a flat screwdriver.
Step 4

Remove the engine cover.
Step 5

Detach the connector from the ignition coil. Use a flat screwdriver.
Step 6

Unscrew the ignition coil bracket. Use Torx T40. Use a ratchet wrench.
Step 7

Take out the ignition coil from the spark plug well. Use a flat screwdriver.
Step 8

Clean dirt, dust and debris from inside the spark plug wells.
Step 9

Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.

Replacement: spark plugs – VAUXHALL FRONTERA Mk I (A). Tip:
Make sure that the threaded part of the spark plug and the electrodes are clean and dry.
Step 10

Take out the spark plugs.
Step 11

Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
Step 12

Install the new spark plugs into their mounting seats.

Step 13

Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 24 nm torque.

Replacement: spark plugs – VAUXHALL FRONTERA Mk I (A). Tip from AUTODOC:
Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Step 14

Install the ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place.
Step 15

Tighten the ignition coil fastening. Use Torx T40. Use a torque wrench. Tighten it to 12 nm torque.
Step 16

Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.

Step 17

Plug in the ignition coil connector.
Step 18

Install the engine cover and secure it. Use a flat screwdriver.

Replacement: spark plugs – VAUXHALL FRONTERA Mk I (A). AUTODOC experts recommend:
Make sure the engine cover is properly seated. It should not be displaced with respect to the guiding fasteners and the throttle body air intake hose.
Step 19

Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.

Step 20

Shut off the engine.

Step 21

Remove the fender protection cover.

Step 22

Close the hood.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Frontera Mk1 (A) Off-Road (U92) model

VAUXHALL FRONTERA Mk I (A) tyre size

How to change engine oil and filter on VAUXHALL Frontera Mk I (A) Off-Road (U92) – replacement guide

Free download PDF
1.65 MB
How to change rear coil springs on VAUXHALL Zafira Mk II (B) (A05) – replacement guide

Free download PDF
1.44 MB
How to change front coil springs on VAUXHALL Meriva Mk II (B) (S10) – replacement guide

Free download PDF
2.78 MB
How to change front coil springs on VAUXHALL Zafira Mk II (B) (A05) – replacement guide

Free download PDF
2.77 MB
How to change front coil springs on VAUXHALL Zafira Mk I (A) (T98) – replacement guide

Free download PDF
3.49 MB
How to change rear coil springs on VAUXHALL Zafira Mk I (A) (T98) – replacement guide

Free download PDF
1.66 MB

How to change spark plugs on VAUXHALL Frontera Mk II (B) Off-Road (U99) petrol – replacement guide

Free download PDF
1.16 MB
How to change spark plugs on VAUXHALL Frontera Mk I (A) Sport (U92) Off-Road Convertible – replacement guide

Free download PDF
1.85 MB
How to change spark plugs on a car – replacement tutorial

Universal

Free download PDF
1.74 MB
How to change spark plugs on VAUXHALL Meriva Mk I (A) (X03) – replacement guide

Free download PDF
1.85 MB
How to change spark plugs on VAUXHALL Agila Mk I (A) (H00) – replacement guide

Free download PDF
1.85 MB
How to change spark plugs on VAUXHALL Antara (L07) – replacement guide

Free download PDF
1.85 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

K2 ROTON wheel cleaner overview

3K views

Published on: 27/03/2025
Petrol or diesel: The engine showdown! | AUTODOC

4K views

Published on: 04/05/2021
DIY vehicle AC compressor restoration

581K views

Published on: 28/11/2024
Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide

3K views

Published on: 23/03/2023