
Disclaimer
How to change spark plugs on RENAULT LAGUNA II (BG0/1_) – replacement guide
downloads:
2
Views:
41

Recommended replacement interval for the part category Spark plug : 60000 km
Important!
This replacement procedure can be used for:
RENAULT LAGUNA II (BG0/1_) 1.6 16V (BG1G, BG1H), RENAULT LAGUNA II (BG0/1_) 2.0 16V (BG00, BG0K, BG0P, BG0W), RENAULT LAGUNA II (BG0/1_) 1.6 16V (BG0A, BG0L) … View more
The steps may slightly vary depending on the car design.
RENAULT LAGUNA II (BG0/1_) 1.6 16V (BG1G, BG1H), RENAULT LAGUNA II (BG0/1_) 2.0 16V (BG00, BG0K, BG0P, BG0W), RENAULT LAGUNA II (BG0/1_) 1.6 16V (BG0A, BG0L) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for LAGUNA II (BG0/1_) and other RENAULT models
Spark plug
Alternative products

High-temperature anti-seize lubricant
Electronic spray
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Torque wrench
Fender cover
Replacement: spark plugs – RENAULT LAGUNA II (BG0/1_). Professionals recommend:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – RENAULT LAGUNA II (BG0/1_). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Unplug the connectors from the ignition coils.
- Step 4Unscrew the ignition coil bracket. Use a drive socket #10. Use a ratchet wrench.
- Step 5Take out the ignition coils from the spark plug wells.Replacement: spark plugs – RENAULT LAGUNA II (BG0/1_). Tip from AUTODOC experts:Remember the sequence of steps for ignition coil demounting.
- Step 6Clean dirt, dust and debris from inside the spark plug wells.
- Step 7Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
- Step 8Take out the spark plugs.
- Step 9Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 10Install the new spark plugs into their mounting seats.
- Step 11Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – RENAULT LAGUNA II (BG0/1_). Tip:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Laguna II Hatchback (BG) model
Popular maintenance tutorials for Renault Laguna 2
Complete guides for changing the Engine spark plug on different RENAULT LAGUNA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT LAGUNA II (BG0/1_)
View more
- TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
- Top 5 mistakes when replacing spark plugs | AUTODOC tips
- Checking the starter without removing it | AUTODOC tips
- How to make an injector test bench yourself
Most commonly replaced car parts on RENAULT LAGUNA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME