
Disclaimer
How to change camshaft position sensor on RENAULT Laguna II Hatchback (BG) – replacement guide
downloads:
0
Views:
4
Important!
This replacement procedure can be used for:
RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG08, BG0G), RENAULT LAGUNA II (BG0/1_) 1.9 dCI (BG0E), RENAULT LAGUNA II (BG0/1_) 2.2 dCi (BG0F), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG0R, BG0E), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG05), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG1A, BG1W, BG0G), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG1A, BG1V), RENAULT LAGUNA II (BG0/1_) 2.2 dCi, RENAULT LAGUNA II (BG0/1_) 2.2 dCi (BG09), RENAULT LAGUNA II (BG0/1_) 1.9 dCi, RENAULT LAGUNA II (BG0/1_) 1.9 dCi, RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG12) … View more
The steps may slightly vary depending on the car design.
RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG08, BG0G), RENAULT LAGUNA II (BG0/1_) 1.9 dCI (BG0E), RENAULT LAGUNA II (BG0/1_) 2.2 dCi (BG0F), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG0R, BG0E), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG05), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG1A, BG1W, BG0G), RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG1A, BG1V), RENAULT LAGUNA II (BG0/1_) 2.2 dCi, RENAULT LAGUNA II (BG0/1_) 2.2 dCi (BG09), RENAULT LAGUNA II (BG0/1_) 1.9 dCi, RENAULT LAGUNA II (BG0/1_) 1.9 dCi, RENAULT LAGUNA II (BG0/1_) 1.9 dCi (BG12) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Camshaft Sensor for LAGUNA II (BG0/1_) and other RENAULT models
Alternative products

Wire brush
All-purpose cleaning spray
Electronic spray
Torque wrench
10 mm socket
Ratchet wrench
Mounting lever
Paper towels
Replacement: camshaft position sensor – RENAULT LAGUNA II (BG0/1_). AUTODOC recommends:
- All the work should be carried out with the ignition switched off.
Replacement: camshaft position sensor – RENAULT LAGUNA II (BG0/1_). Take the following steps:
- Step 1Lift the vehicle using a vehicle lift or place it over an inspection pit.Step 2
Clean the fastener of the camshaft position sensor. Use a wire brush. Use an all-purpose cleaning spray. - Step 3
Detach the connector of the camshaft position sensor. - Step 4
Unscrew the fastener of the camshaft position sensor. Use a 10 mm socket. Use a ratchet wrench. - Step 5
Remove the fastening bolt. - Step 6
Remove the camshaft position sensor. - Step 7
Plug the sensor mounting hole with a paper towel to prevent dust and dirt from getting in. - Step 8
Clean the mounting seat of the camshaft position sensor. Use an all-purpose cleaning spray. - Step 9
Treat the connector of the camshaft position sensor. Use an electronic spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Laguna II Hatchback (BG) model
Popular maintenance tutorials for Renault Laguna 2
Complete guides for changing the Camshaft position sensor on different RENAULT LAGUNA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT LAGUNA II (BG0/1_)
View more
Top 5 car noises you shouldn't ignore
Reviving Your Car: How to Start After Extended Idle Time | AUTODOC Tips
How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
Most commonly replaced car parts on RENAULT LAGUNA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






























