Disclaimer
How to change spark plugs on OPEL ZAFIRA TOURER C (P12) – replacement guide
downloads:
33
Views:
618
Recommended replacement interval for the part category Spark plug : 4 year / 60000 km
Important!
This replacement procedure can be used for:
OPEL ZAFIRA TOURER C (P12) 1.8 (75) … View more
The steps may slightly vary depending on the car design.
OPEL ZAFIRA TOURER C (P12) 1.8 (75) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for ZAFIRA TOURER C (P12) and other OPEL models
Alternative products

Electronic spray
High-temperature anti-seize lubricant
Torque wrench
Spark plug socket # 16
Torx bit T40
Ratchet wrench
Crow bar
Fender cover
Replacement: spark plugs – OPEL ZAFIRA TOURER C (P12). Tip from AUTODOC:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – OPEL ZAFIRA TOURER C (P12). Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover.AUTODOC recommends:Replacement: spark plugs – OPEL ZAFIRA TOURER C (P12). Do not use excessive force when removing the part as this may damage it. - Step 4
Detach the connector from the ignition coil. - Step 5
Unscrew the ignition coil bolts. Use Torx T40. Use a ratchet wrench. - Step 6Pry up the ignition coil. Use a crowbar.Step 7
Take out the ignition coil from the spark plug well. - Step 8
Clean dirt, dust and debris from inside the spark plug wells. - Step 9
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench. - Step 10
Take out the spark plugs. - Step 11
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 12
Install the new spark plugs into their mounting seats. - Step 13
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – OPEL ZAFIRA TOURER C (P12). AUTODOC recommends:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Zafira C Tourer (P12) model
Popular maintenance tutorials for OPEL ZAFIRA TOURER C (P12)
Complete guides for changing the Engine spark plug on different OPEL ZAFIRA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL ZAFIRA TOURER C (P12)
View more
How to unlock your car without a key | AUTODOC tips
How to prevent car windows from fogging up | AUTODOC tips
How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
How to restore a steering wheel | AUTODOC tips
Most commonly replaced car parts on OPEL ZAFIRA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


















