
Disclaimer
How to change spark plugs on MERCEDES-BENZ T2/L Platform/Chassis – replacement guide
downloads:
8
Views:
41

Recommended replacement interval for the part category Spark plug : 18 month / 30000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ T2/L Platform/Chassis L 410 (309.000, 309.002) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ T2/L Platform/Chassis L 410 (309.000, 309.002) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for T2/L Platform/Chassis and other MERCEDES-BENZ models
Spark plug
Alternative products

Wire brush
High-temperature anti-seize lubricant
Dielectric grease
Torque wrench
Combination spanner #10
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Phillips screwdriver
Crow bar
Fender cover
Replacement: spark plugs – MERCEDES-BENZ T2/L Platform/Chassis. Professionals recommend:
- The replacement procedure is the same for all spark plugs.
- Warning! Shut down the engine before starting any work – MERCEDES-BENZ T2/L Platform/Chassis.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Disconnect the earth cable terminal from the battery. Use a combination spanner #10.
- Step 4Unscrew the inlet pipe fasteners. Use a Phillips screwdriver. Use a drive socket #10. Use a ratchet wrench.
- Step 5Remove the fastening bolts.
- Step 6Remove the inlet pipe.
- Step 7Disconnect the spark plug wires from the spark plugs.
- Step 8Clean dirt, dust and debris from inside the spark plug wells.
- Step 9Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
- Step 10Take out the spark plugs.
- Step 11Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 12Install the new spark plugs into their mounting seats.
- Step 13Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 22 nm torque.Replacement: spark plugs – MERCEDES-BENZ T2/L Platform/Chassis. AUTODOC recommends:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ T2/L Platform/Chassis model
Popular maintenance tutorials for MERCEDES-BENZ T2/L Platform/Chassis
Complete guides for changing the Engine spark plug on different MERCEDES-BENZ T2 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ T2/L Platform/Chassis
View more
- The most common problems when buying a used car | AUTODOC
- TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
- DIY brake caliper restoration | AUTODOC tips
- Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
Most commonly replaced car parts on MERCEDES-BENZ T2
Time to replace parts? Get even better deals in our Shop app.

SCAN ME