Disclaimer
How to change spark plugs on DS DS 3 Convertible – replacement guide
downloads:
0
Views:
6
Recommended replacement interval for the part category Spark plug : 4 year / 30000 km
Important!
This replacement procedure can be used for:
DS DS 3 Convertible 1.6 THP 208 … View more
The steps may slightly vary depending on the car design.
DS DS 3 Convertible 1.6 THP 208 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for DS 3 Convertible and other DS models
Alternative products

Electronic spray
High-temperature anti-seize lubricant
Torque wrench
Drive socket # 8
Spark plug socket # 14
Ratchet wrench
Fender cover
Replacement: spark plugs – DS DS 3 Convertible. AUTODOC recommends:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – DS DS 3 Convertible. Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the engine cover fastener. Use a drive socket #8. Use a ratchet wrench. - Step 4
Remove the engine cover.AUTODOC recommends:Do not apply excessive force when removing the part. Otherwise you may damage it. - Step 5
Unplug the connectors from the ignition coils. - Step 6
Take out the ignition coil from the spark plug well.Replacement: spark plugs – DS DS 3 Convertible. Tip from AUTODOC:Remember the sequence of steps for ignition coil demounting. - Step 7
Clean dirt, dust and debris from inside the spark plug wells. - Step 8
Unscrew the spark plugs. Use the spark plug socket #14. - Step 9
Take out the spark plugs. - Step 10
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 11
Install the new spark plugs into their mounting seats. - Step 12
Screw new spark plugs and tighten them. Use the spark plug socket #14. Use a torque wrench. Tighten it to 25 nm torque.AUTODOC recommends:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the DS DS3 Convertible model
Popular maintenance tutorials for DS3 Convertible
Complete guides for changing the Engine spark plug on different DS DS 3 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your DS DS 3 Convertible
View more
Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
2 ways to clean the EGR valve – which one is better?
Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
Most commonly replaced car parts on DS DS 3
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
















