Disclaimer
How to change serpentine belt on VW Sharan 1 – replacement guide
downloads:
7
Views:
183
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0, VW SHARAN (7M8, 7M9, 7M6) 1.8 T 20V, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI 4motion, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0 LPG … View more
The steps may slightly vary depending on the car design.
VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0, VW SHARAN (7M8, 7M9, 7M6) 1.8 T 20V, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI 4motion, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 1.9 TDI, VW SHARAN (7M8, 7M9, 7M6) 2.0 LPG … View more
The steps may slightly vary depending on the car design.
How to change serpentine belt on VW SHARAN 1 [TUTORIAL AUTODOC]

All the parts you need to replace – Poly V-Belt for SHARAN (7M8, 7M9, 7M6) and other VW models
Alternative products

Combination spanner #16
Fender cover
Replacement: serpentine belt – VW Sharan 1. AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: serpentine belt – VW Sharan 1. Take the following steps:
- Step 1
Open the hood. - Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car. - Step 3
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16. - Step 4
Remove the V-ribbed belt.Replacement: serpentine belt – VW Sharan 1. Tip from AUTODOC experts:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary. - Step 5
Return the tensioner pulley to its initial position. - Step 6
Install the V-ribbed belt.Replacement: serpentine belt – VW Sharan 1. Tip from AUTODOC:Make sure that the V-ribbed belt fits all pulleys snugly. Make sure that the V-ribbed belt is properly tensioned. - Step 7
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Sharan I (7M8, 7M9, 7M6) model
Popular maintenance tutorials for VW Sharan 1
Complete guides for changing the Alternator belt on different VW SHARAN models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW SHARAN (7M8, 7M9, 7M6)
View more
What to do if the ABS light comes on: DIY Diagnostics Tips
DIY vehicle AC compressor restoration
How to Get the Best Deals on Car Parts | Save Money with AUTODOC
DIY car soundproofing | AUTODOC tips
Most commonly replaced car parts on VW SHARAN
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
























