
Disclaimer
How to change serpentine belt on VW Passat B7 Alltrack (365) – replacement guide
downloads:
3
Views:
27

Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
VW Passat Alltrack (365) 2.0 TDI 4motion, VW Passat Alltrack (365) 2.0 TDI 4motion, VW Passat Alltrack (365) 2.0 TDI, VW Passat Alltrack (365) 2.0 TDI 4motion … View more
The steps may slightly vary depending on the car design.
VW Passat Alltrack (365) 2.0 TDI 4motion, VW Passat Alltrack (365) 2.0 TDI 4motion, VW Passat Alltrack (365) 2.0 TDI, VW Passat Alltrack (365) 2.0 TDI 4motion … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Passat Alltrack (365) and other VW models
Serpentine belt
Alternative products

Torque wrench
Combination spanner #16
Wheel impact socket #17
Fender cover
Wheel chock
Replacement: serpentine belt – VW PASSAT ALLTRACK (365). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Secure the wheels with chocks.Step 4Loosen the wheel mounting bolts. Use wheel impact socket #17.Step 5Lift the car using a jack or place it over an inspection pit.Step 6Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW PASSAT ALLTRACK (365)Step 7Remove the wheel.Step 8Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
- Step 9Remove the V-ribbed belt.
- Step 10Return the tensioner pulley to its initial position. Use a combination spanner #16.Replacement: serpentine belt – VW PASSAT ALLTRACK (365). Professionals recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 11Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.Step 12Install the V-ribbed belt.Replacement: serpentine belt – VW PASSAT ALLTRACK (365). Tip:Make sure that the V-ribbed belt fits all pulleys snugly.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Passat B7 Alltrack (365) model
Popular maintenance tutorials for VW Passat B7 Alltrack
Complete guides for changing the Alternator belt on different VW PASSAT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Passat Alltrack (365)
View more
- What to do if the ABS light comes on: DIY Diagnostics Tips
- Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
- How to easily repair a punctured tyre | AUTODOC tips
- Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
Most commonly replaced car parts on VW PASSAT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME