Disclaimer
How to change serpentine belt on VAUXHALL Meriva Mk I (A) (X03) – replacement guide
downloads:
9
Views:
247
Recommended replacement interval for the part category Serpentine belt : 10 year / 150000 km
Important!
This replacement procedure can be used for:
VAUXHALL Meriva Mk I (A) (X03) 1.3 CDTI, VAUXHALL Meriva Mk I (A) (X03) 1.3 CDTI … View more
The steps may slightly vary depending on the car design.
VAUXHALL Meriva Mk I (A) (X03) 1.3 CDTI, VAUXHALL Meriva Mk I (A) (X03) 1.3 CDTI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Meriva Mk I (A) (X03) and other VAUXHALL models
Alternative products

Brake cleaner
Copper grease
Combination spanner #15
Torx bit T20
Wheel impact socket #17
Torque wrench
Fender cover
Wheel chock
Replacement: serpentine belt – VAUXHALL MERIVA Mk I (A). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: serpentine belt – VAUXHALL MERIVA Mk I (A). Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Secure the wheels with chocks. - Step 4
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 5Lift the car using a jack or place it over an inspection pit.Step 6
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VAUXHALL MERIVA Mk I (A) - Step 7
Remove the wheel. - Step 8
Unscrew and remove the wheel arch cover fasteners. Use Torx T20. - Step 9
Remove the wheel arch cover. - Step 10
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15. - Step 11
Remove the V-ribbed belt.Replacement: serpentine belt – VAUXHALL MERIVA Mk I (A). AUTODOC recommends:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary. - Step 12
Return the tensioner pulley to its initial position. - Step 13
Install the V-ribbed belt.Replacement: serpentine belt – VAUXHALL MERIVA Mk I (A). Tip:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 14
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15. - Step 15
Place the V-ribbed belt on the tensioner pulley. - Step 16
Return the tensioner pulley to its initial position. Use a combination spanner #15.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Meriva Mk1 (A) (X03) model
Popular maintenance tutorials for VAUXHALL MERIVA Mk I (A)
Complete guides for changing the Alternator belt on different VAUXHALL MERIVA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL Meriva Mk I (A) (X03)
View more
Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
Top 7 signs of a bad starter
3 essential tips for choosing summer tyres | Get ready for warmer weather
Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
Most commonly replaced car parts on VAUXHALL MERIVA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























