
Disclaimer
How to change serpentine belt on RENAULT Kangoo I Express (FC) – replacement guide
downloads:
2
Views:
58

Recommended replacement interval for the part category Serpentine belt : 5 year / 120000 km
Important!
This replacement procedure can be used for:
RENAULT KANGOO Express (FC0/1_) 1.6 16V, RENAULT KANGOO Express (FC0/1_) 1.6 16V 4x4 (FC0L, FC0P, FC0S), RENAULT KANGOO Express (FC0/1_) 1.4 (FC0C, FC0B, FC0H, FC0M), RENAULT KANGOO Express (FC0/1_) 1.6 16V bivalent … View more
The steps may slightly vary depending on the car design.
RENAULT KANGOO Express (FC0/1_) 1.6 16V, RENAULT KANGOO Express (FC0/1_) 1.6 16V 4x4 (FC0L, FC0P, FC0S), RENAULT KANGOO Express (FC0/1_) 1.4 (FC0C, FC0B, FC0H, FC0M), RENAULT KANGOO Express (FC0/1_) 1.6 16V bivalent … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for KANGOO Express (FC0/1_) and other RENAULT models
Serpentine belt
Alternative products

Torque wrench
Combination spanner #13
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Phillips Screwdriver
Fender cover
Wheel chock
AUTODOC recommends:
- Please note: all work on the car – RENAULT KANGOO Express (FC0/1_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Secure the wheels with chocks. Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 4Raise the car.Replacement: serpentine belt – RENAULT KANGOO Express (FC0/1_). Tip from AUTODOC:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 5Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT KANGOO Express (FC0/1_)
- Step 6Remove the wheel.
- Step 7Unscrew and remove the wheel arch cover fasteners. Use a Phillips screwdriver.
- Step 8Remove the wheel arch cover.
- Step 9Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13.
- Step 10Remove the V-ribbed belt.Replacement: serpentine belt – RENAULT KANGOO Express (FC0/1_). Professionals recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
- Step 11Install the V-ribbed belt.AUTODOC recommends:Make sure that the V-ribbed belt fits all pulleys snugly.
- Step 12Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13.
- Step 13Place the V-ribbed belt on the tensioner pulley. Return the tensioner pulley to its initial position.
- Step 14Rotate the crankshaft several times to check whether the new V-ribbed belt is working correctly. Use a drive socket #18. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Kangoo I Express (FC) model
Popular maintenance tutorials for Renault Kangoo Express
Complete guides for changing the Alternator belt on different RENAULT KANGOO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT KANGOO Express (FC0/1_)
View more
- How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
- Revive Your Vehicle's Look | How to Restore Wheel Rims Yourself!
- Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
- DIY brake caliper restoration | AUTODOC tips
Most commonly replaced car parts on RENAULT KANGOO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME