Disclaimer
How to change serpentine belt on RENAULT Captur (J5_, H5_) – replacement guide
downloads:
92
Views:
1413
Recommended replacement interval for the part category Serpentine belt : 6 year / 150000 km
Important!
This replacement procedure can be used for:
RENAULT Captur (J5_, H5_) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
RENAULT Captur (J5_, H5_) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Captur (J5_, H5_) and other RENAULT models
Alternative products

Torque wrench
Combination spanner #10
Combination spanner #16
Drive socket # 13
Wheel impact socket #17
Ratchet wrench
Clip removal tool
Fender cover
Wheel chock
Replacement: serpentine belt – RENAULT CAPTUR. AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – RENAULT CAPTUR. Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Secure the wheels with chocks. - Step 4
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 5Raise the front of the car and secure on supports.Step 6
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. RENAULT CAPTUR - Step 7
Remove the wheel. - Step 8
Remove the wheel arch cover. Use a clip removal tool. - Step 9
Unscrew the fuel filter bracket fixing bolts. Use a drive socket #13. Use a ratchet wrench. - Step 10
Remove the fuel filter fastening bracket. - Step 11
Unscrew the fuel filter bracket fixing bolts. Use a combination spanner #10. - Step 12
Remove the fuel filter fastening bracket. - Step 13
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16. - Step 14
Remove the V-ribbed belt. - Step 15Return the tensioner pulley to its initial position.Replacement: serpentine belt – RENAULT CAPTUR. Tip:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 16
Install the V-ribbed belt.AUTODOC recommends:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 17
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16. - Step 18
Place the V-ribbed belt on the tensioner pulley. - Step 19
Return the tensioner pulley to its initial position.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Captur (J5_, H5_) model
Popular maintenance tutorials for Renault Captur J5
Complete guides for changing the Alternator belt on different RENAULT CAPTUR models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT Captur (J5_, H5_)
View more
5 mistakes made when washing the engine | AUTODOC tips
Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
Top 5 reasons why your car squeals | AUTODOC Tips
K2 ROTON wheel cleaner overview
Most commonly replaced car parts on RENAULT CAPTUR
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























