When to replace the Poly V-Belt on your PEUGEOT 207
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
PEUGEOT 207 Van (WA_, WC_) 1.6 VTi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for 207 Van (WA_, WC_) and other PEUGEOT models
How to change Serpentine belt on PEUGEOT 207 Van 1.4 – step-by-step instructions for straightforward car repair
Serpentine belt
How to change V-Ribbed Belt Set on PEUGEOT 207 Van 1.4 – step-by-step instructions for straightforward car repair
V-Ribbed Belt Set
How to change Water Pump + V-Ribbed Belt Kit on PEUGEOT 207 Van 1.4 – step-by-step instructions for straightforward car repair
Water Pump + V-Ribbed Belt Kit
Tools
Replacement: serpentine belt – PEUGEOT 207 Van. Tools you need:
Combination spanner #30
Fender cover
AUTODOC recommends:
  • Please note: all work on the car – PEUGEOT 207 Van – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Poly V-Belt on PEUGEOT 207 Van 2007 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #30.
  2. Step 4
    How to replace PEUGEOT 207 Van (WA_, WC_) 1.4 2008 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
    Replacement: serpentine belt – PEUGEOT 207 Van. Tip from AUTODOC:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  3. Step 5
    Return the tensioner pulley to its initial position.
    Step 6
    PEUGEOT 207 Van 1.6 VTi 2009 Poly V-Belt replacement: free workshop manuals
    Install the V-ribbed belt.
    AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  4. Step 7
    Changing Poly V-Belt on PEUGEOT 207 Van (WA_, WC_) 1.6 VTi 2010 by yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #30.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 207 Van (WA_, WC_) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 207 Van (WA_, WC_) Poly V-Belt replacement - online guide
Tips & tricks for your PEUGEOT 207 Van (WA_, WC_)
View more
  • How to change Alternator belt on PEUGEOT 207 Van (WA_, WC_) 1.4 - replacement tricks
    5 most common causes of oil leaks | AUTODOC tips
  • Changing Auxiliary belt PEUGEOT 207 Van 1.4 - Replacement Tips
    5 common car washing mistakes | AUTODOC tips
  • Maintenance Hacks - PEUGEOT 207 Van (WA_, WC_) 1.6 VTi Poly V-belt replacement guide
    DIY valve cover restoration | AUTODOC tips
  • Replace Drive belt on PEUGEOT 207 Van - free video tips
    How to swap the engine on a BMW E30 Turbo | SUPERCAR AUTODOC